All items that fit an Alfa Romeo Mito 2010

Will fit in an ?

No, it won't fit.

It will not fit in this setup: NISSEDAL Mirror, black, 25 5/8x59″ is too large for an Alfa Romeo Mito 2010 with seats up.

Alfa Romeo Mito 2010

Fit Details

With seats up, This package will not fit in this setup. The blocker is opening width, and you're short by 15⅜″ even with diagonal loading. We're about 95% confident in this estimate.

NISSEDAL Mirror, black, 25 5/8x59″

NISSEDAL Mirror, black, 25 5/8x59″

Box: 60¾″ × 25¾″ × 2¼″ · 21 lb 7 oz

Based on IKEA US (United States).

Package dimensions last checked and updated on Oct 21, 2026

  • Package #1

    60¾″ × 25¾″ × 2¼″

    Status:15⅜″ short

    Limiting factor:Opening width

    Best orientation:Diagonal

Vehicle limits

Trunk limits for Alfa Romeo Mito 2010

Opening width / height above sill

31½″ / 19⅝″

Cargo width / height

38⅝″ / 32⅝″

Cargo length seats up / down

26¾″ / 50⅜″

Loading sill height

31⅞″

Alfa Romeo Mito 2010

Measurements last checked and updated on Oct 21, 2026

Helpful tips

Use these loading tips to improve your chances of fitting NISSEDAL Mirror, black, 25 5/8x59″ in Alfa Romeo Mito 2010.

  • Optimize opening width

    Keep the narrow edge leading while entering the opening.

  • Load diagonally first

    Load diagonally first, then straighten once inside.

  • Try fitting alternatives

    Check the Similar items that fit section for safer alternatives.

About the Alfa Romeo Mito 2010 boot

A big lift comes first in the Mito: its loading sill is 31⅞″ high, and the floor sits 13″ below it. The boot is 32⅝″ tall from the floor, but the opening above the sill is just 19⅝″ high and 31½″ wide. Inside, the floor is wider, at 38⅝″ across its narrowest point. So size every box by the opening, not the space behind it. From the sill to the upright rear seats the floor is 26¾″, and 50⅜″ with them folded, which suits low boxes and short flat packs. Keep each box level as it clears the sill, then set it down the 13″ onto the floor.

About the NISSEDAL Mirror, black, 25 5/8x59″ package

There is a mirror inside this box, so treat it as fragile from the moment you pick it up. It is long, flat and thin: 60¾″ × 25¾″ × 2¼″, at 21 lb 7 oz. The weight is easy to manage; the corners and the face of the box need the care. Its long side is the one to measure against your boot: 60¾″ of floor to lie flat and straight. Carry it by the long sides with a hand under the bottom edge, never by one corner, and keep anything heavy off it once it is in.

Frequently asked questions

Find quick answers about fit for NISSEDAL Mirror, black, 25 5/8x59″ in Alfa Romeo Mito 2010, including seats up vs seats down, limiting factor, best orientation, and package-by-package margins.

Will NISSEDAL Mirror, black, 25 5/8x59″ fit in Alfa Romeo Mito 2010?

No. With seats up, it is short by 15⅜″ at Opening width, even with diagonal loading.

What is the tightest part?

The limiting factor is Opening width, with -15⅜″ margin in seats up.

Why does it not fit?

The blocker is Opening width: with seats up, the box is 15⅜″ bigger than the space there.

Can I load it diagonally?

Yes, diagonal is the best orientation for this check, with -15⅜″ around the limiting point.

Which loading orientation works best?

Diagonal is the best orientation for this result in seats up.

Does it fit with seats up or seats down?

Seats up: No (-15⅜″). Seats down: No (-6⅛″). Default selection follows YES > MAYBE > NO.

What do YES, MAYBE and NO mean here?

YES means there is at least 2⅜″ to spare at the tightest point, in the best way the box can go in. MAYBE means it fits on paper, but with less than 2⅜″ to spare, so trim, the parcel shelf or the loading angle can decide it. NO means the box is bigger than the space at its tightest point, whichever way it goes in. Every margin on this page is that real gap: the car's measurement minus the box's.

What should I do instead?

Use the Helpful tips & alternatives section to choose a smaller item, different orientation, or split-load plan.

Is the trunk opening the issue?

Yes. The tightest constraint is at the opening (Opening width) with -15⅜″ margin.

How tight is this fit?

This result is in the clear no-fit band (-15⅜″ at Opening width).