
SKOGSTA Bench with storage, acacia/black, 47 1/4 "
+1⅛″ margin
No, it won't fit.

Fit Details

MYDAL Bunk bed frame, pine, Twin
Box: 80½″ × 14¼″ × 3¾″ · 59 lb 8 oz
Based on IKEA US (United States).
Package dimensions last checked and updated on Aug 04, 2026
Package
Status
Limiting factor
Best orientation
Package #1
80½″ × 14¼″ × 3¾″
Status:20⅞″ short
Limited by
Limiting factor:Opening width
Best orientation:Diagonal
Package #2
78″ × 14¼″ × 3¾″
Status:19″ short
Limited by
Limiting factor:Opening width
Best orientation:Diagonal
Vehicle limits

Opening width / height
41¾″ / 31⅛″
Cargo width / height
41⅜″ / 33⅛″
Cargo length seats up / down
37¾″ / 66⅞″
Loading sill height
29⅞″
Mazda CX-5 2023
Measurements last checked and updated on Aug 14, 2026
Helpful tips
Use these loading tips to improve your chances of fitting MYDAL Bunk bed frame, pine, Twin in Mazda CX-5 2023.
Optimize opening width
Keep the narrow edge leading while entering the opening.
Load diagonally first
Load diagonally first, then straighten once inside.
Plan package order
Load each package one at a time. Individual package fit does not guarantee all packages will fit stacked together.
Try fitting alternatives
Check the Similar items that fit section for safer alternatives.
Alternatives that fit in Mazda CX-5 2023
Ranked by fit margin and package-dimension similarity. This improves as we index more items.
About the Mazda CX-5 2023 boot
The CX-5's cargo opening measures 41¾″ wide by 31⅛″ tall, with 37¾″ of floor behind it when the seats are up. Fold the bench and the floor stretches to 66⅞″, a gain of 29⅛″, which is what makes longer loads possible at all. The floor holds 41⅜″ at its narrowest, so wide flat boxes lie level instead of wedging. Short, boxy loads fit fine seats up; anything long depends entirely on folding. The liftover sits at 29⅞″ with a 2″ drop to the floor, so lift heavier boxes clear of the sill rather than dragging them across it.
About the MYDAL Bunk bed frame, pine, Twin package
The MYDAL bunk bed frame comes as two long, flat cartons, the largest 80½″ × 14¼″ × 3¾″. The length is the problem: at 80½″ that box is longer than most boot floors, and the pair together weigh 116 lb 13 oz, so plan on a two-person lift. Flat and rigid, it wants an estate, a hatchback with the seats folded, or an SUV with a long load bay. Slide the longest box in first, flat along the folded seats, and protect the ends where they press against the tailgate.
Frequently asked questions
Find quick answers about fit for MYDAL Bunk bed frame, pine, Twin in Mazda CX-5 2023, including seats up vs seats down, limiting factor, best orientation, and package-by-package margins.
Will MYDAL Bunk bed frame, pine, Twin fit in Mazda CX-5 2023?
No. With seats up, it is short by 20⅞″ at Opening width, even with diagonal loading.
What is the tightest part?
The limiting factor is Opening width, with -20⅞″ margin in seats up.
Why does it not fit?
The blocker is Opening width. The worst margin is -20⅞″ in seats up, so clearance is below the required buffer.
Can I load it diagonally?
Yes, diagonal is the best orientation for this check, with -20⅞″ around the limiting point.
Do all packages fit in the car at the same time?
We test each package individually. All packages fitting individually does not guarantee they will fit stacked together. You may need multiple trips.
Does it fit with seats up or seats down?
Seats up: No (-20⅞″). Seats down: No (-4¾″). Default selection follows YES > MAYBE > NO.
Which package is the hardest to load?
Package #1 (80½″ × 14¼″ × 3¾″) is the tightest, with -20⅞″ at Opening width.
What should I do instead?
Use the Helpful tips & alternatives section to choose a smaller item, different orientation, or split-load plan.
Is the trunk opening the issue?
Yes. The tightest constraint is at the opening (Opening width) with -20⅞″ margin.
Do any packages fit?
No. All 2 packages fail this configuration, with the worst margin at Opening width.