
KALLAX Shelf unit, white, 30 1/8x30 1/8 "
+1½″ margin
No, it won't fit.

Fit Details

MICKE Desk, white, 41 3/8x19 5/8 "
Box: 44″ × 29¼″ × 4¼″ · 61 lb 12 oz
Based on IKEA US (United States).
Package dimensions last checked and updated on Jun 24, 2026
Package
Status
Limiting factor
Best orientation
Package #1
44″ × 29¼″ × 4¼″
Status:11″ short
Limited by
Limiting factor:Opening width
Best orientation:Straight
Vehicle limits

Opening width / height
34¼″ / 18⅞″
Cargo width / height
35⅞″ / 33⅞″
Cargo length seats up / down
30⅜″ / 30⅜″
Loading sill height
36¼″
Alfa Romeo Spider 2008
Measurements last checked and updated on Sep 09, 2026
Helpful tips
Use these loading tips to improve your chances of fitting MICKE Desk, white, 41 3/8x19 5/8 " in Alfa Romeo Spider 2008.
Optimize opening width
Keep the narrow edge leading while entering the opening.
Keep a straight loading path
Keep the package straight and level while loading.
Try fitting alternatives
Check the Similar items that fit section for safer alternatives.
Alternatives that fit in Alfa Romeo Spider 2008
Ranked by fit margin and package-dimension similarity. This improves as we index more items.
About the MICKE Desk, white, 41 3/8x19 5/8 " package
The MICKE desk ships as one flat, wide board: 44 inches long, 29¼ inches across, and only 4¼ inches thick. The awkward part is not the length, it is the width paired with the weight. At 61 lb 12 oz in a single carton, it is a dense, rigid slab that two hands can manage but one cannot. Most hatchbacks and SUVs take it lying flat with the rear seats folded, as long as the 29¼ inch width clears the wheel arches. Load it flat, never on its edge, and slip a blanket underneath so the finish does not scuff on the boot floor.
Frequently asked questions
Find quick answers about fit for MICKE Desk, white, 41 3/8x19 5/8 " in Alfa Romeo Spider 2008, including seats up vs seats down, limiting factor, best orientation, and package-by-package margins.
Will MICKE Desk, white, 41 3/8x19 5/8 " fit in Alfa Romeo Spider 2008?
No. With seats up, it is short by 11″ at Opening width, even with straight loading.
What is the tightest part?
The limiting factor is Opening width, with -11″ margin in seats up.
What should I do instead?
Use the Helpful tips & alternatives section to choose a smaller item, different orientation, or split-load plan.
Which loading orientation works best?
Straight is the best orientation for this result in seats up.
How confident is this result?
Confidence is 95 out of 100 based on available dimensions and margin tightness.
Does it fit with seats up or seats down?
Seats up: No (-11″). Seats down: No (-11″). Default selection follows YES > MAYBE > NO.
Why does it not fit?
The blocker is Opening width. The worst margin is -11″ in seats up, so clearance is below the required buffer.
Is the trunk opening the issue?
Yes. The tightest constraint is at the opening (Opening width) with -11″ margin.
How tight is this fit?
This result is in the clear no-fit band (-11″ at Opening width).