Willfit in a?

Maybe, it's a tight fit.

All 3 packages of MALM Bed frame, white, Queen look possible diagonally in a Toyota RAV4 2024 with seats down, but clearances are tight.

Toyota RAV4 2024

Fit Details

With seats down, This looks possible, but tight. All 3 packages are borderline or better; the tightest is Package #1 (81¼″ × 9¾″ × 3″) at opening width with -1″ (best loaded diagonal). See the Helpful tips section below for practical loading suggestions. We're about 75% confident in this estimate.

MALM Bed frame, white, Queen

MALM Bed frame, white, Queen

Box: 81¼″ × 9¾″ × 3″ · 40 lb

Based on IKEA US (United States).

Package dimensions last checked and updated on Jun 25, 2026

  • Package #1

    81¼″ × 9¾″ × 3″

    Status:-1″ tight

    Limiting factor:Opening width

    Best orientation:Diagonal

  • Package #2

    67½″ × 30½″ × 3½″

    Status:+2½″ margin

    Limiting factor:Cargo length

    Best orientation:Straight

  • Package #3

    54¾″ × 2½″ × 2¼″

    Status:+17¾″ margin

    Limiting factor:Cargo length

    Best orientation:Diagonal

Vehicle limits

Trunk limits for Toyota RAV4 2024

Opening width / height

41″ / 34¼″

Cargo width / height

39⅜″ / 36¼″

Cargo length seats up / down

39¾″ / 71¼″

Loading sill height

27⅛″

Toyota RAV4 2024

Measurements last checked and updated on Mar 10, 2026

Helpful tips

Use these loading tips to improve your chances of fitting MALM Bed frame, white, Queen in Toyota RAV4 2024.

  • Optimize opening width

    Keep the narrow edge leading while entering the opening.

  • Load diagonally first

    Load diagonally first, then straighten once inside.

  • Plan package order

    Load each package one at a time. Individual package fit does not guarantee all packages will fit stacked together.

  • Clear real-world obstacles

    Clear the trunk before loading. Existing cargo, trunk cover, and wheel-arch bumps can reduce usable space.

About the Toyota RAV4 2024 boot

The RAV4 gives you a big, upright SUV boot that swallows tall loads. The opening is 41″ wide × 34¼″ tall, and the floor runs 39¾″ with the seats up, reaching 71¼″ folded, a gain of 31½″. At its narrowest the floor still holds 39⅜″, so wide boxes sit flat. The tall opening is the standout here, so boxes that stump lower boots clear this one. The sill is a low 27⅛″ with just a 2″ drop, easy on your back. It handles tall boxes, multi-package loads and long flat-packs once folded. Load the tallest item upright first, while the height is free.

About the MALM Bed frame, white, Queen package

The MALM queen frame ships as 3 flat boxes, and the longest is the one that decides everything: 81¼″ long, 9¾″ wide and just 3″ thick. It is a long, rigid plank that will not bend around a wheel arch or a seat back, and the set weighs 101 lb 6 oz in total, so it is heavy as well as long. A boot with over 81¼″ of load length handles it, which in practice means an estate, a hatchback with the seats folded, or an SUV. Slide the long box in first, flat and angled if needed, then lay the two shorter boxes on top. Protect the leading edge as you push it over the sill.

Frequently asked questions

Find quick answers about fit for MALM Bed frame, white, Queen in Toyota RAV4 2024, including seats up vs seats down, limiting factor, best orientation, and package-by-package margins.

Will MALM Bed frame, white, Queen fit in Toyota RAV4 2024?

Maybe. With seats down, this is a borderline fit at Opening width (-1″). Best orientation: diagonal.

What is the tightest part?

The limiting factor is Opening width, with -1″ margin in seats down.

What can I try to make it work?

Use diagonal loading and focus on opening width. Keep the narrow edge leading while entering the opening. Load diagonally first, then straighten once inside.

Can I load it diagonally?

Yes, diagonal is the best orientation for this check, with -1″ around the limiting point.

Do all packages fit in the car at the same time?

We test each package individually. All packages fitting individually does not guarantee they will fit stacked together. You may need multiple trips.

Does it fit with seats up or seats down?

Seats up: No (-19¾″). Seats down: Maybe (-1″). Default selection follows YES > MAYBE > NO.

Which package is the hardest to load?

Package #1 (81¼″ × 9¾″ × 3″) is the tightest, with -1″ at Opening width.

Do I need to fold the seats?

Results differ by configuration. Seats up is No and seats down is Maybe.

Is the trunk opening the issue?

Yes. The tightest constraint is at the opening (Opening width) with -1″ margin.

What could change the result in real life?

Cargo liners, wheel-arch bumps, the trunk cover, and items already in the trunk can reduce usable space. Measure the tightest point if the fit is close.