POÄNG Armchair, birch veneer/Knisa light beige
+2⅛″ margin
WillMALM Bed frame, white, Queenfit in aPeugeot 308 2022?
No, it won't fit.
None of the 3 packages of MALM Bed frame, white, Queen fit in a Peugeot 308 2022 with seats up.
Fit Details
With seats up, Not a fit. Even the best attempt still fails at opening width by 23⅞″ (worst package: Package #1 (81¼″ × 9¾″ × 3″)). We're about 95% confident in this estimate.
MALM Bed frame, white, Queen
Box: 81¼″ × 9¾″ × 3″ · 40 lb
Based on IKEA US (United States).
Package dimensions last checked and updated on Jun 25, 2026
Package
Status
Limiting factor
Best orientation
Package #1
81¼″ × 9¾″ × 3″
Status:23⅞″ short
Limited by
Limiting factor:Opening width
Best orientation:Diagonal
Package #2
67½″ × 30½″ × 3½″
Status:2½″ short
Limited by
Limiting factor:Opening height
Best orientation:Straight
Package #3
54¾″ × 2½″ × 2¼″
Status:4⅜″ short
Limited by
Limiting factor:Opening width
Best orientation:Diagonal
Vehicle limits
Opening width / height
37¾″ / 29⅛″
Cargo width / height
32¼″ / 35⅞″
Cargo length seats up / down
30¾″ / 58¼″
Loading sill height
27½″
Peugeot 308 2022
Measurements last checked and updated on Jul 06, 2026
Helpful tips
Use these loading tips to improve your chances of fitting MALM Bed frame, white, Queen in Peugeot 308 2022.
Optimize opening width
Keep the narrow edge leading while entering the opening.
Load diagonally first
Load diagonally first, then straighten once inside.
Plan package order
Load each package one at a time. Individual package fit does not guarantee all packages will fit stacked together.
Try fitting alternatives
Check the Similar items that fit section for safer alternatives.
Alternatives that fit in Peugeot 308 2022
Ranked by fit margin and package-dimension similarity. This improves as we index more items.
About the Peugeot 308 2022 boot
The Peugeot 308 gives you a hatchback boot that is short but usefully deep. The opening measures 37¾″ wide by 29⅛″ tall, and the floor runs 30¾″ with the seats up, stretching to 58¼″ once you fold the rear bench, a gain of 27½″. The narrow point of the floor is 32¼″ across, so wide flat loads sit fine, but anything past 30¾″ long needs the seats down. The load lip sits 27½″ off the ground with a 6¾″ drop to the floor, so heavy boxes take a short lift then settle low. It takes suitcases and boxed furniture well, long flat-pack less so. Fold the seats before you load, not halfway through.
About the MALM Bed frame, white, Queen package
The MALM queen frame ships as 3 flat boxes, and the longest is the one that decides everything: 81¼″ long, 9¾″ wide and just 3″ thick. It is a long, rigid plank that will not bend around a wheel arch or a seat back, and the set weighs 101 lb 6 oz in total, so it is heavy as well as long. A boot with over 81¼″ of load length handles it, which in practice means an estate, a hatchback with the seats folded, or an SUV. Slide the long box in first, flat and angled if needed, then lay the two shorter boxes on top. Protect the leading edge as you push it over the sill.
Frequently asked questions
Find quick answers about fit for MALM Bed frame, white, Queen in Peugeot 308 2022, including seats up vs seats down, limiting factor, best orientation, and package-by-package margins.
Will MALM Bed frame, white, Queen fit in Peugeot 308 2022?
No. With seats up, it is short by 23⅞″ at Opening width, even with diagonal loading.
What is the tightest part?
The limiting factor is Opening width, with -23⅞″ margin in seats up.
Why does it not fit?
The blocker is Opening width. The worst margin is -23⅞″ in seats up, so clearance is below the required buffer.
Can I load it diagonally?
Yes, diagonal is the best orientation for this check, with -23⅞″ around the limiting point.
Do all packages fit in the car at the same time?
We test each package individually. All packages fitting individually does not guarantee they will fit stacked together. You may need multiple trips.
Does it fit with seats up or seats down?
Seats up: No (-23⅞″). Seats down: No (-8⅜″). Default selection follows YES > MAYBE > NO.
Which package is the hardest to load?
Package #1 (81¼″ × 9¾″ × 3″) is the tightest, with -23⅞″ at Opening width.
What should I do instead?
Use the Helpful tips & alternatives section to choose a smaller item, different orientation, or split-load plan.
Is the trunk opening the issue?
Yes. The tightest constraint is at the opening (Opening width) with -23⅞″ margin.
Do any packages fit?
No. All 3 packages fail this configuration, with the worst margin at Opening width.