Willfit in a?

No, it won't fit.

For MALM Bed frame, white, Queen in a Nissan Qashqai 2025 with seats up: no package is a clear yes; 2 packages are borderline, and 1 package does not fit.

Nissan Qashqai 2025

Fit Details

With seats up, Not a fit in this setup. 2 packages are borderline, and 1 does not fit. Worst case is Package #1 (81¼″ × 9¾″ × 3″), short by 19⅞″ at opening width. We're about 95% confident in this estimate.

MALM Bed frame, white, Queen

MALM Bed frame, white, Queen

Box: 81¼″ × 9¾″ × 3″ · 40 lb

Based on IKEA US (United States).

Package dimensions last checked and updated on Jun 25, 2026

  • Package #1

    81¼″ × 9¾″ × 3″

    Status:19⅞″ short

    Limiting factor:Opening width

    Best orientation:Diagonal

  • Package #2

    67½″ × 30½″ × 3½″

    Status:-¼″ tight

    Limiting factor:Opening height

    Best orientation:Straight

  • Package #3

    54¾″ × 2½″ × 2¼″

    Status:-½″ tight

    Limiting factor:Opening width

    Best orientation:Diagonal

Vehicle limits

Trunk limits for Nissan Qashqai 2025

Opening width / height

44⅛″ / 31½″

Cargo width / height

41″ / 33⅞″

Cargo length seats up / down

34¼″ / 65″

Loading sill height

30⅜″

Nissan Qashqai 2025

Measurements last checked and updated on Mar 26, 2026

Helpful tips

Use these loading tips to improve your chances of fitting MALM Bed frame, white, Queen in Nissan Qashqai 2025.

  • Optimize opening width

    Keep the narrow edge leading while entering the opening.

  • Load diagonally first

    Load diagonally first, then straighten once inside.

  • Plan package order

    Load each package one at a time. Individual package fit does not guarantee all packages will fit stacked together.

  • Try fitting alternatives

    Check the Similar items that fit section for safer alternatives.

About the Nissan Qashqai 2025 boot

The Qashqai gives you a roomy, square SUV boot that loads flat. The opening is 44⅛″ wide × 31½″ tall, and the floor runs 34¼″ with the seats up, reaching 65″ folded, a gain of 30¾″. At its narrowest the floor still measures 41″, so wide boxes go in without angling. The sill sits at 30⅜″ but the drop to the floor is only 2⅜″, so the load stays near level once it is over the lip. It handles tall boxes, multi-package loads and cases well, very long flat-packs only with the seats folded. Push items in flat rather than dropping them.

About the MALM Bed frame, white, Queen package

The MALM queen frame ships as 3 flat boxes, and the longest is the one that decides everything: 81¼″ long, 9¾″ wide and just 3″ thick. It is a long, rigid plank that will not bend around a wheel arch or a seat back, and the set weighs 101 lb 6 oz in total, so it is heavy as well as long. A boot with over 81¼″ of load length handles it, which in practice means an estate, a hatchback with the seats folded, or an SUV. Slide the long box in first, flat and angled if needed, then lay the two shorter boxes on top. Protect the leading edge as you push it over the sill.

Frequently asked questions

Find quick answers about fit for MALM Bed frame, white, Queen in Nissan Qashqai 2025, including seats up vs seats down, limiting factor, best orientation, and package-by-package margins.

Will MALM Bed frame, white, Queen fit in Nissan Qashqai 2025?

No. With seats up, it is short by 19⅞″ at Opening width, even with diagonal loading.

What is the tightest part?

The limiting factor is Opening width, with -19⅞″ margin in seats up.

Why does it not fit?

The blocker is Opening width. The worst margin is -19⅞″ in seats up, so clearance is below the required buffer.

Can I load it diagonally?

Yes, diagonal is the best orientation for this check, with -19⅞″ around the limiting point.

Do all packages fit in the car at the same time?

We test each package individually. All packages fitting individually does not guarantee they will fit stacked together. You may need multiple trips.

Does it fit with seats up or seats down?

Seats up: No (-19⅞″). Seats down: No (-3¼″). Default selection follows YES > MAYBE > NO.

Which package is the hardest to load?

Package #1 (81¼″ × 9¾″ × 3″) is the tightest, with -19⅞″ at Opening width.

What should I do instead?

Use the Helpful tips & alternatives section to choose a smaller item, different orientation, or split-load plan.

Is the trunk opening the issue?

Yes. The tightest constraint is at the opening (Opening width) with -19⅞″ margin.

Which loading orientation works best?

Diagonal is the best orientation for this result in seats up.