Will fit in a ?

No, it won't fit.

For MALM Bed frame, white, Queen in a Citroen Berlingo 2018 with seats up: 1 of 3 packages fit, and 2 packages do not fit.

Citroen Berlingo 2018

Fit Details

With seats up, Not a full fit. 1 of 3 packages fit, and 2 do not fit. Worst case is Package #1 (81¼″ × 9¾″ × 3″), short by 17⅝″ at opening width. Packages that do not fit will need a larger vehicle or delivery. We're about 95% confident in this estimate.

MALM Bed frame, white, Queen

MALM Bed frame, white, Queen

Box: 81¼″ × 9¾″ × 3″ · 39 lb

Based on IKEA US (United States).

Package dimensions last checked and updated on Aug 06, 2026

  • Package #1

    81¼″ × 9¾″ × 3″

    Status:17⅝″ short

    Limiting factor:Opening width

    Best orientation:Diagonal

  • Package #2

    67½″ × 30½″ × 3½″

    Status:8¼″ short

    Limiting factor:Opening width

    Best orientation:Diagonal

  • Package #3

    54¾″ × 2½″ × 2¼″

    Status:+1¾″ margin

    Limiting factor:Opening width

    Best orientation:Diagonal

Vehicle limits

Trunk limits for Citroen Berlingo 2018

Opening width / height

47¼″ / 39⅜″

Cargo width / height

47¼″ / 39⅜″

Cargo length seats up / down

39″ / 69¼″

Loading sill height

22½″

Citroen Berlingo 2018

Measurements last checked and updated on Jul 23, 2026

Helpful tips

Use these loading tips to improve your chances of fitting MALM Bed frame, white, Queen in Citroen Berlingo 2018.

  • Optimize opening width

    Keep the narrow edge leading while entering the opening.

  • Load diagonally first

    Load diagonally first, then straighten once inside.

  • Plan package order

    Load each package one at a time. Individual package fit does not guarantee all packages will fit stacked together.

  • Try fitting alternatives

    Check the Similar items that fit section for safer alternatives.

About the Citroen Berlingo 2018 boot

The Citroen Berlingo gives you a proper van-style boot: a wide, square opening at 47¼″ wide × 39⅜″ tall and a flat floor that stays 47¼″ across at its narrowest. Seats up the floor runs 39″, short for long boxes, but fold the bench and it stretches to 69¼″, a gain of 30⅜″. The load sill sits 22½″ up with no drop to the floor, so you slide boxes straight in rather than lifting them down. It handles wide, bulky and multi-box loads happily. For anything longer than a couple of feet, fold the bench first and load flat.

About the MALM Bed frame, white, Queen package

The MALM queen frame ships as 3 flat boxes, and the longest is the one that decides everything: 81¼″ long, 9¾″ wide and just 3″ thick. It is a long, rigid plank that will not bend around a wheel arch or a seat back, and the set weighs 101 lb 6 oz in total, so it is heavy as well as long. A boot with over 81¼″ of load length handles it, which in practice means an estate, a hatchback with the seats folded, or an SUV. Slide the long box in first, flat and angled if needed, then lay the two shorter boxes on top. Protect the leading edge as you push it over the sill.

Frequently asked questions

Find quick answers about fit for MALM Bed frame, white, Queen in Citroen Berlingo 2018, including seats up vs seats down, limiting factor, best orientation, and package-by-package margins.

Will MALM Bed frame, white, Queen fit in Citroen Berlingo 2018?

No. With seats up, it is short by 17⅝″ at Opening width, even with diagonal loading.

What is the tightest part?

The limiting factor is Opening width, with -17⅝″ margin in seats up.

Why does it not fit?

The blocker is Opening width. The worst margin is -17⅝″ in seats up, so clearance is below the required buffer.

Can I load it diagonally?

Yes, diagonal is the best orientation for this check, with -17⅝″ around the limiting point.

Do all packages fit in the car at the same time?

We test each package individually. All packages fitting individually does not guarantee they will fit stacked together. You may need multiple trips.

Does it fit with seats up or seats down?

Seats up: No (-17⅝″). Seats down: No (-1¼″). Default selection follows YES > MAYBE > NO.

Which package is the hardest to load?

Package #1 (81¼″ × 9¾″ × 3″) is the tightest, with -17⅝″ at Opening width.

What should I do instead?

Use the Helpful tips & alternatives section to choose a smaller item, different orientation, or split-load plan.

Is the trunk opening the issue?

Yes. The tightest constraint is at the opening (Opening width) with -17⅝″ margin.

How many packages fit and how many do not?

Fit packages: 1. Borderline packages: 0. Not fitting packages: 2.