
ALEX Desk, white, 52x22 7/8″
+11⅝″ margin
All items that fit a Hyundai Kona 2024
Maybe, it's a tight fit.

Fit Details

LISABO Table, ash veneer, 55 1/8x30 3/4″
Box: 64¾″ × 32″ × 2″ · 45 lb
Based on IKEA US (United States).
Package dimensions last checked and updated on Oct 21, 2026
Package
Status
Limiting factor
Best orientation
Package #1
64¾″ × 32″ × 2″
Status:+⅝″, tight
Limited by
Limiting factor:Cargo length
Best orientation:Straight
Vehicle limits

Opening width / height above sill
41″ / 28¾″
Cargo width / height
41″ / 30¾″
Cargo length seats up / down
33⅞″ / 65⅜″
Loading sill height
26¾″
Hyundai Kona 2024
Measurements last checked and updated on Oct 21, 2026
Helpful tips
Use these loading tips to improve your chances of fitting LISABO Table, ash veneer, 55 1/8x30 3/4″ in Hyundai Kona 2024.
Use available cargo length
Push the package fully toward the seat backs to use all cargo length.
Keep a straight loading path
Keep the package straight and level while loading.
Clear real-world obstacles
Clear the trunk before loading. Existing cargo, trunk cover, and wheel-arch bumps can reduce usable space.
Alternatives that fit in Hyundai Kona 2024
Ranked by fit margin and package-dimension similarity. This improves as we index more items.
About the Hyundai Kona 2024 boot
Barely a step separates the loading sill from the floor of the Hyundai Kona 2024 boot: just 2″. The opening is 41″ wide, matching the floor at its narrowest, and clears 28¾″ above a sill 26¾″ high. From the floor, the boot is 30¾″ tall. With the rear seats up you have 33⅞″ of floor, the longest a box can be if it lies flat lengthways. Folding the seats adds 31½″, for 65⅜″. Lift a heavy box only as far as the sill, then slide it the rest of the way.
About the LISABO Table, ash veneer, 55 1/8x30 3/4″ package
One flat box holds the whole LISABO table: 64¾″ × 32″ × 2″, at 45 lb. At only 2″ thick and 32″ wide, it is too thin to grip well and too broad to carry under one arm. Lying flat and straight, it needs 64¾″ of boot floor, and the opening has to clear that 32″ width one way or the other. Carry it between two people, one at each short end, with your hands under the box rather than pinching the thin edges, and keep it level as you lift it and set it down.
Frequently asked questions
Find quick answers about fit for LISABO Table, ash veneer, 55 1/8x30 3/4″ in Hyundai Kona 2024, including seats up vs seats down, limiting factor, best orientation, and package-by-package margins.
Will LISABO Table, ash veneer, 55 1/8x30 3/4″ fit in Hyundai Kona 2024?
Maybe. With seats down, it fits on paper with ⅝″ to spare at Cargo length, less than the 2⅜″ a clear yes needs. Best orientation: straight.
What is the tightest part?
The limiting factor is Cargo length, with +⅝″ margin in seats down.
What can I try to make it work?
Use straight loading and focus on cargo length. Push the package fully toward the seat backs to use all cargo length. Keep the package straight and level while loading.
What could change the result in real life?
Cargo liners, wheel-arch bumps, the trunk cover, and items already in the trunk can reduce usable space. Measure the tightest point if the fit is close.
How tight is this fit?
This result is in the borderline band (+⅝″ at Cargo length).
Does it fit with seats up or seats down?
Seats up: No (-9⅝″). Seats down: Maybe (+⅝″). Default selection follows YES > MAYBE > NO.
What do YES, MAYBE and NO mean here?
YES means there is at least 2⅜″ to spare at the tightest point, in the best way the box can go in. MAYBE means it fits on paper, but with less than 2⅜″ to spare, so trim, the parcel shelf or the loading angle can decide it. NO means the box is bigger than the space at its tightest point, whichever way it goes in. Every margin on this page is that real gap: the car's measurement minus the box's.
Do I need to fold the seats?
Results differ by configuration. Seats up is No and seats down is Maybe.
Which loading orientation works best?
Straight is the best orientation for this result in seats down.
How confident is this result?
Confidence is 75 out of 100 based on available dimensions and margin tightness.