KALLAX Shelf unit, white, 30 1/8x30 1/8 "
+4½″ margin
Will fit in a ?
No, it won't fit.
It will not fit in this setup: LISABO Table, ash veneer, 55 1/8x30 3/4 " is too large for a BMW 1 Series 2020 with seats up.
Fit Details
With seats up, This package will not fit in this setup. The blocker is opening height, and you're short by 7¼″ even with straight loading. We're about 95% confident in this estimate.
LISABO Table, ash veneer, 55 1/8x30 3/4 "
Box: 64¾″ × 32″ × 2″ · 47 lb 12 oz
Based on IKEA US (United States).
Package dimensions last checked and updated on Jul 28, 2026
Package
Status
Limiting factor
Best orientation
Package #1
64¾″ × 32″ × 2″
Status:7¼″ short
Limited by
Limiting factor:Opening height
Best orientation:Straight
Vehicle limits
Opening width / height
37⅜″ / 26″
Cargo width / height
40⅛″ / 29⅛″
Cargo length seats up / down
29½″ / 57½″
Loading sill height
27½″
BMW 1 Series 2020
Measurements last checked and updated on Sep 01, 2026
Helpful tips
Use these loading tips to improve your chances of fitting LISABO Table, ash veneer, 55 1/8x30 3/4 " in BMW 1 Series 2020.
Manage opening height
Keep the highest edge low at the trunk opening.
Keep a straight loading path
Keep the package straight and level while loading.
Try fitting alternatives
Check the Similar items that fit section for safer alternatives.
Alternatives that fit in BMW 1 Series 2020
Ranked by fit margin and package-dimension similarity. This improves as we index more items.
About the BMW 1 Series 2020 boot
The 1 Series boot is short and low rather than deep. With the seats up the floor gives you 29½″, which is the constraint on most flat-pack runs, and the opening measures 37⅜″ wide by 26″ tall. Fold the rear bench and the floor almost doubles to 57½″, a gain of 28″. The floor is 40⅛″ across at its narrowest, so width is rarely your problem. The sill sits at 27½″ with a 3⅛″ drop, which makes this one of the easier hatchbacks to load. Fold the seats first, load long, then fill the gaps.
About the LISABO Table, ash veneer, 55 1/8x30 3/4 " package
The LISABO table ships as one big flat slab: a single package 64¾″ long, 32″ wide and only 2″ thick, at 47 lb 12 oz. The awkward part is not the weight, it is the footprint. Nearly 65″ long and a full 32″ wide means it needs a long, wide load floor, so an estate or a hatchback with the rear seats folded takes it easily, while a small saloon boot will fight you. One person can carry it, but two make the doorways safer. Slide it in flat and push it right up against the seatbacks, and keep the veneer face off the boot floor so it does not scuff in transit.
Frequently asked questions
Find quick answers about fit for LISABO Table, ash veneer, 55 1/8x30 3/4 " in BMW 1 Series 2020, including seats up vs seats down, limiting factor, best orientation, and package-by-package margins.
Will LISABO Table, ash veneer, 55 1/8x30 3/4 " fit in BMW 1 Series 2020?
No. With seats up, it is short by 7¼″ at Opening height, even with straight loading.
What is the tightest part?
The limiting factor is Opening height, with -7¼″ margin in seats up.
What should I do instead?
Use the Helpful tips & alternatives section to choose a smaller item, different orientation, or split-load plan.
Which loading orientation works best?
Straight is the best orientation for this result in seats up.
How confident is this result?
Confidence is 95 out of 100 based on available dimensions and margin tightness.
Does it fit with seats up or seats down?
Seats up: No (-7¼″). Seats down: No (-7¼″). Default selection follows YES > MAYBE > NO.
Why does it not fit?
The blocker is Opening height. The worst margin is -7¼″ in seats up, so clearance is below the required buffer.
Is the trunk opening the issue?
Yes. The tightest constraint is at the opening (Opening height) with -7¼″ margin.
How tight is this fit?
This result is in the clear no-fit band (-7¼″ at Opening height).