Will fit in an ?

Maybe, it's a tight fit.

It might fit, but it's tight: LISABO Table, ash veneer, 55 1/8x30 3/4 " is borderline in a straight orientation in an Alfa Romeo Mito 2010 with seats up.

Alfa Romeo Mito 2010

Fit Details

With seats up, It's close. This package is a borderline fit at opening height (-½″), best loaded straight. See the Helpful tips section below for practical loading suggestions. We're about 75% confident in this estimate.

LISABO Table, ash veneer, 55 1/8x30 3/4 "

LISABO Table, ash veneer, 55 1/8x30 3/4 "

Box: 64¾″ × 32″ × 2″ · 47 lb 12 oz

Based on IKEA US (United States).

Package dimensions last checked and updated on Jul 28, 2026

Link to the source

  • Package #1

    64¾″ × 32″ × 2″

    Status:-½″ tight

    Limiting factor:Opening height

    Best orientation:Straight

Vehicle limits

Trunk limits for Alfa Romeo Mito 2010

Opening width / height

31½″ / 32⅝″

Cargo width / height

38⅝″ / 45⅝″

Cargo length seats up / down

26¾″ / 50⅜″

Loading sill height

31⅞″

Alfa Romeo Mito 2010

Measurements last checked and updated on Sep 09, 2026

Helpful tips

Use these loading tips to improve your chances of fitting LISABO Table, ash veneer, 55 1/8x30 3/4 " in Alfa Romeo Mito 2010.

  • Manage opening height

    Keep the highest edge low at the trunk opening.

  • Keep a straight loading path

    Keep the package straight and level while loading.

  • Clear real-world obstacles

    Clear the trunk before loading. Existing cargo, trunk cover, and wheel-arch bumps can reduce usable space.

Alternatives that fit in Alfa Romeo Mito 2010

Ranked by fit margin and package-dimension similarity. This improves as we index more items.

About the LISABO Table, ash veneer, 55 1/8x30 3/4 " package

The LISABO table ships as one big flat slab: a single package 64¾″ long, 32″ wide and only 2″ thick, at 47 lb 12 oz. The awkward part is not the weight, it is the footprint. Nearly 65″ long and a full 32″ wide means it needs a long, wide load floor, so an estate or a hatchback with the rear seats folded takes it easily, while a small saloon boot will fight you. One person can carry it, but two make the doorways safer. Slide it in flat and push it right up against the seatbacks, and keep the veneer face off the boot floor so it does not scuff in transit.

Frequently asked questions

Find quick answers about fit for LISABO Table, ash veneer, 55 1/8x30 3/4 " in Alfa Romeo Mito 2010, including seats up vs seats down, limiting factor, best orientation, and package-by-package margins.

Will LISABO Table, ash veneer, 55 1/8x30 3/4 " fit in Alfa Romeo Mito 2010?

Maybe. With seats up, this is a borderline fit at Opening height (-½″). Best orientation: straight.

What is the tightest part?

The limiting factor is Opening height, with -½″ margin in seats up.

Is the trunk opening the issue?

Yes. The tightest constraint is at the opening (Opening height) with -½″ margin.

Which loading orientation works best?

Straight is the best orientation for this result in seats up.

How confident is this result?

Confidence is 75 out of 100 based on available dimensions and margin tightness.

Does it fit with seats up or seats down?

Seats up: Maybe (-½″). Seats down: Maybe (-½″). Default selection follows YES > MAYBE > NO.

What can I try to make it work?

Use straight loading and focus on opening height. Keep the highest edge low at the trunk opening. Keep the package straight and level while loading.

What could change the result in real life?

Cargo liners, wheel-arch bumps, the trunk cover, and items already in the trunk can reduce usable space. Measure the tightest point if the fit is close.

How tight is this fit?

This result is in the borderline band (-½″ at Opening height).