Will fit in an ?

No, it won't fit.

It will not fit in this setup: LISABO Table, ash veneer, 55 1/8x30 3/4 " is too large for an Alfa Romeo Giulietta 2017 with seats up.

Alfa Romeo Giulietta 2017

Fit Details

With seats up, This package will not fit in this setup. The blocker is opening height, and you're short by 3¼″ even with straight loading. We're about 95% confident in this estimate.

LISABO Table, ash veneer, 55 1/8x30 3/4 "

LISABO Table, ash veneer, 55 1/8x30 3/4 "

Box: 64¾″ × 32″ × 2″ · 47 lb 12 oz

Based on IKEA US (United States).

Package dimensions last checked and updated on Jul 28, 2026

  • Package #1

    64¾″ × 32″ × 2″

    Status:3¼″ short

    Limiting factor:Opening height

    Best orientation:Straight

Vehicle limits

Trunk limits for Alfa Romeo Giulietta 2017

Opening width / height

35⅜″ / 29⅞″

Cargo width / height

40⅛″ / 38¼″

Cargo length seats up / down

29⅞″ / 57⅞″

Loading sill height

30⅜″

Alfa Romeo Giulietta 2017

Measurements last checked and updated on Sep 01, 2026

Helpful tips

Use these loading tips to improve your chances of fitting LISABO Table, ash veneer, 55 1/8x30 3/4 " in Alfa Romeo Giulietta 2017.

  • Manage opening height

    Keep the highest edge low at the trunk opening.

  • Keep a straight loading path

    Keep the package straight and level while loading.

  • Try fitting alternatives

    Check the Similar items that fit section for safer alternatives.

About the Alfa Romeo Giulietta 2017 boot

The Giulietta gives you a short, wide load bay rather than a deep one. The opening measures 35⅜″ wide by 29⅞″ tall, and behind it the floor runs only 29⅞″ with the seats up while the narrowest point across is 40⅛″. Fold the rear bench and the floor stretches to 57⅞″, a gain of 28″, which is where this boot does its real work. It takes stacked boxes and soft bags well, long flat cartons badly. The sill sits at 30⅜″ with an 8¼″ drop, so slide loads in and lower them rather than dropping them.

About the LISABO Table, ash veneer, 55 1/8x30 3/4 " package

The LISABO table ships as one big flat slab: a single package 64¾″ long, 32″ wide and only 2″ thick, at 47 lb 12 oz. The awkward part is not the weight, it is the footprint. Nearly 65″ long and a full 32″ wide means it needs a long, wide load floor, so an estate or a hatchback with the rear seats folded takes it easily, while a small saloon boot will fight you. One person can carry it, but two make the doorways safer. Slide it in flat and push it right up against the seatbacks, and keep the veneer face off the boot floor so it does not scuff in transit.

Frequently asked questions

Find quick answers about fit for LISABO Table, ash veneer, 55 1/8x30 3/4 " in Alfa Romeo Giulietta 2017, including seats up vs seats down, limiting factor, best orientation, and package-by-package margins.

Will LISABO Table, ash veneer, 55 1/8x30 3/4 " fit in Alfa Romeo Giulietta 2017?

No. With seats up, it is short by 3¼″ at Opening height, even with straight loading.

What is the tightest part?

The limiting factor is Opening height, with -3¼″ margin in seats up.

What should I do instead?

Use the Helpful tips & alternatives section to choose a smaller item, different orientation, or split-load plan.

Which loading orientation works best?

Straight is the best orientation for this result in seats up.

How confident is this result?

Confidence is 95 out of 100 based on available dimensions and margin tightness.

Does it fit with seats up or seats down?

Seats up: No (-3¼″). Seats down: No (-3¼″). Default selection follows YES > MAYBE > NO.

Why does it not fit?

The blocker is Opening height. The worst margin is -3¼″ in seats up, so clearance is below the required buffer.

Is the trunk opening the issue?

Yes. The tightest constraint is at the opening (Opening height) with -3¼″ margin.

How tight is this fit?

This result is in the near miss band (-3¼″ at Opening height).