POÄNG Armchair, birch veneer/Knisa light beige
+½″ margin
All items that fit an Alfa Romeo Mito 2010
Will fit in an ?
No, it won't fit.
It will not fit in this setup: KARMSUND Floor mirror, black, 15 3/4x65 3/4″ is too large for an Alfa Romeo Mito 2010 with seats up.
Fit Details
With seats up, This package will not fit in this setup. The blocker is opening width, and you're short by 17⅝″ even with diagonal loading. We're about 95% confident in this estimate.
KARMSUND Floor mirror, black, 15 3/4x65 3/4″
Box: 65″ × 16¼″ × 1¼″ · 22 lb
Based on IKEA US (United States).
Package dimensions last checked and updated on Oct 21, 2026
Package
Status
Limiting factor
Best orientation
Package #1
65″ × 16¼″ × 1¼″
Status:17⅝″ short
Limited by
Limiting factor:Opening width
Best orientation:Diagonal
Vehicle limits
Opening width / height above sill
31½″ / 19⅝″
Cargo width / height
38⅝″ / 32⅝″
Cargo length seats up / down
26¾″ / 50⅜″
Loading sill height
31⅞″
Alfa Romeo Mito 2010
Measurements last checked and updated on Oct 21, 2026
Helpful tips
Use these loading tips to improve your chances of fitting KARMSUND Floor mirror, black, 15 3/4x65 3/4″ in Alfa Romeo Mito 2010.
Optimize opening width
Keep the narrow edge leading while entering the opening.
Load diagonally first
Load diagonally first, then straighten once inside.
Try fitting alternatives
Check the Similar items that fit section for safer alternatives.
Alternatives that fit in Alfa Romeo Mito 2010
Ranked by fit margin and package-dimension similarity. This improves as we index more items.
About the Alfa Romeo Mito 2010 boot
A big lift comes first in the Mito: its loading sill is 31⅞″ high, and the floor sits 13″ below it. The boot is 32⅝″ tall from the floor, but the opening above the sill is just 19⅝″ high and 31½″ wide. Inside, the floor is wider, at 38⅝″ across its narrowest point. So size every box by the opening, not the space behind it. From the sill to the upright rear seats the floor is 26¾″, and 50⅜″ with them folded, which suits low boxes and short flat packs. Keep each box level as it clears the sill, then set it down the 13″ onto the floor.
About the KARMSUND Floor mirror, black, 15 3/4x65 3/4″ package
The KARMSUND floor mirror ships flat, in a single 65″ × 16¼″ × 1¼″ box. At 22 lb it is not heavy. The shape is the issue: long, wide and very thin, with a mirror inside that should not bend. To travel flat, it needs a floor 65″ long and 16¼″ wide, but almost no height. Carry it on its long edge, because a thin box is far stiffer that way than flat. In the boot, keep its whole length supported and put nothing on top of it.
Frequently asked questions
Find quick answers about fit for KARMSUND Floor mirror, black, 15 3/4x65 3/4″ in Alfa Romeo Mito 2010, including seats up vs seats down, limiting factor, best orientation, and package-by-package margins.
Will KARMSUND Floor mirror, black, 15 3/4x65 3/4″ fit in Alfa Romeo Mito 2010?
No. With seats up, it is short by 17⅝″ at Opening width, even with diagonal loading.
What is the tightest part?
The limiting factor is Opening width, with -17⅝″ margin in seats up.
Why does it not fit?
The blocker is Opening width: with seats up, the box is 17⅝″ bigger than the space there.
Can I load it diagonally?
Yes, diagonal is the best orientation for this check, with -17⅝″ around the limiting point.
Which loading orientation works best?
Diagonal is the best orientation for this result in seats up.
Does it fit with seats up or seats down?
Seats up: No (-17⅝″). Seats down: No (-4⅞″). Default selection follows YES > MAYBE > NO.
What do YES, MAYBE and NO mean here?
YES means there is at least 2⅜″ to spare at the tightest point, in the best way the box can go in. MAYBE means it fits on paper, but with less than 2⅜″ to spare, so trim, the parcel shelf or the loading angle can decide it. NO means the box is bigger than the space at its tightest point, whichever way it goes in. Every margin on this page is that real gap: the car's measurement minus the box's.
What should I do instead?
Use the Helpful tips & alternatives section to choose a smaller item, different orientation, or split-load plan.
Is the trunk opening the issue?
Yes. The tightest constraint is at the opening (Opening width) with -17⅝″ margin.
How tight is this fit?
This result is in the clear no-fit band (-17⅝″ at Opening width).