NÄMMARÖ Privacy screen, light brown stained indoor/outdoor, 55 1/8x31 1/2x19 5/8″
+16″ margin
All items that fit an Aiways U6 2023
Will fit in an ?
Yes, it will fit!
Good news: KARMSUND Floor mirror, black, 15 3/4x65 3/4″ should fit diagonally in an Aiways U6 2023 with seats down.
Fit Details
With seats down, Good news - this package should fit, with 10⅛″ to spare at opening height when loading diagonal. We're about 95% confident in this estimate.
KARMSUND Floor mirror, black, 15 3/4x65 3/4″
Box: 65″ × 16¼″ × 1¼″ · 22 lb
Based on IKEA US (United States).
Package dimensions last checked and updated on Oct 21, 2026
Package
Status
Limiting factor
Best orientation
Package #1
65″ × 16¼″ × 1¼″
Status:+10⅛″ to spare
Limited by
Limiting factor:Opening height
Best orientation:Diagonal
Vehicle limits
Opening width / height above sill
39⅜″ / 26⅜″
Cargo width / height
40⅛″ / 26¾″
Cargo length seats up / down
39⅜″ / 71¼″
Loading sill height
29½″
Aiways U6 2023
Measurements last checked and updated on Oct 21, 2026
Helpful tips
Use these loading tips to improve your chances of fitting KARMSUND Floor mirror, black, 15 3/4x65 3/4″ in Aiways U6 2023.
Manage opening height
Keep the highest edge low at the trunk opening.
Load diagonally first
Load diagonally first, then straighten once inside.
Other items to check in Aiways U6 2023
Ranked by fit margin and package-dimension similarity. This improves as we index more items.
About the Aiways U6 2023 boot
Whatever clears the U6's opening has room across the boot floor. The opening is 39⅜″ wide and 26⅜″ high above the loading sill, and the floor beyond it is a touch wider, 40⅛″ at its narrowest. Behind the upright rear seats the floor is 39⅜″ long. Some packs longer than that fit at an angle on their side, and you can fold the seats for more. That adds 31⅞″, for 71¼″. The sill is 29½″ high, with the floor just ⅜″ below it. Before you lift a box, check its two shorter sides against 39⅜″ and 26⅜″.
About the KARMSUND Floor mirror, black, 15 3/4x65 3/4″ package
The KARMSUND floor mirror ships flat, in a single 65″ × 16¼″ × 1¼″ box. At 22 lb it is not heavy. The shape is the issue: long, wide and very thin, with a mirror inside that should not bend. To travel flat, it needs a floor 65″ long and 16¼″ wide, but almost no height. Carry it on its long edge, because a thin box is far stiffer that way than flat. In the boot, keep its whole length supported and put nothing on top of it.
Frequently asked questions
Find quick answers about fit for KARMSUND Floor mirror, black, 15 3/4x65 3/4″ in Aiways U6 2023, including seats up vs seats down, limiting factor, best orientation, and package-by-package margins.
Will KARMSUND Floor mirror, black, 15 3/4x65 3/4″ fit in Aiways U6 2023?
Yes. With seats down, it fits with 10⅛″ to spare at Opening height. Best orientation: diagonal.
What is the tightest part?
The limiting factor is Opening height, with +10⅛″ margin in seats down.
Do I need to fold the seats?
Results differ by configuration. Seats up is No and seats down is Yes.
Is the trunk opening the issue?
Yes. The tightest constraint is at the opening (Opening height) with +10⅛″ margin.
How tight is this fit?
This result is in the comfortable clearance band (+10⅛″ at Opening height).
Does it fit with seats up or seats down?
Seats up: No (-7½″). Seats down: Yes (+10⅛″). Default selection follows YES > MAYBE > NO.
What do YES, MAYBE and NO mean here?
YES means there is at least 2⅜″ to spare at the tightest point, in the best way the box can go in. MAYBE means it fits on paper, but with less than 2⅜″ to spare, so trim, the parcel shelf or the loading angle can decide it. NO means the box is bigger than the space at its tightest point, whichever way it goes in. Every margin on this page is that real gap: the car's measurement minus the box's.
Can I load it diagonally?
Yes, diagonal is the best orientation for this check, with +10⅛″ around the limiting point.
Which loading orientation works best?
Diagonal is the best orientation for this result in seats down.
How confident is this result?
Confidence is 95 out of 100 based on available dimensions and margin tightness.