Will fit in an ?

Maybe, it's a tight fit.

All 2 packages of KALLAX Shelf unit, white, 43 7/8x57 5/8 " look possible diagonally in an Alfa Romeo Giulietta 2017 with seats down, but clearances are tight.

Alfa Romeo Giulietta 2017

Fit Details

With seats down, This looks possible, but tight. All 2 packages are borderline or better; the tightest is Package #1 (56½″ × 16″ × 5″) at opening width with +⅞″ (best loaded diagonal). See the Helpful tips section below for practical loading suggestions. We're about 75% confident in this estimate.

KALLAX Shelf unit, white, 43 7/8x57 5/8 "

KALLAX Shelf unit, white, 43 7/8x57 5/8 "

Box: 56½″ × 16″ × 5″ · 52 lb

Based on IKEA US (United States).

Package dimensions last checked and updated on Aug 31, 2026

  • Package #1

    56½″ × 16″ × 5″

    Status:+⅞″ tight

    Limiting factor:Opening width

    Best orientation:Diagonal

  • Package #2

    56½″ × 16¼″ × 4¾″

    Status:+1⅛″ tight

    Limiting factor:Opening width

    Best orientation:Diagonal

Vehicle limits

Trunk limits for Alfa Romeo Giulietta 2017

Opening width / height

35⅜″ / 29⅞″

Cargo width / height

40⅛″ / 38¼″

Cargo length seats up / down

29⅞″ / 57⅞″

Loading sill height

30⅜″

Alfa Romeo Giulietta 2017

Measurements last checked and updated on Sep 01, 2026

Helpful tips

Use these loading tips to improve your chances of fitting KALLAX Shelf unit, white, 43 7/8x57 5/8 " in Alfa Romeo Giulietta 2017.

  • Optimize opening width

    Keep the narrow edge leading while entering the opening.

  • Load diagonally first

    Load diagonally first, then straighten once inside.

  • Plan package order

    Load each package one at a time. Individual package fit does not guarantee all packages will fit stacked together.

  • Clear real-world obstacles

    Clear the trunk before loading. Existing cargo, trunk cover, and wheel-arch bumps can reduce usable space.

About the Alfa Romeo Giulietta 2017 boot

The Giulietta gives you a short, wide load bay rather than a deep one. The opening measures 35⅜″ wide by 29⅞″ tall, and behind it the floor runs only 29⅞″ with the seats up while the narrowest point across is 40⅛″. Fold the rear bench and the floor stretches to 57⅞″, a gain of 28″, which is where this boot does its real work. It takes stacked boxes and soft bags well, long flat cartons badly. The sill sits at 30⅜″ with an 8¼″ drop, so slide loads in and lower them rather than dropping them.

About the KALLAX Shelf unit, white, 43 7/8x57 5/8 " package

The KALLAX shelf unit arrives as two packages, and the larger one measures 56½″ long, 16″ wide and 5″ thick. That length is what decides the car. The whole order weighs 95 lb 3 oz, so it is a two-person lift even though the boxes look thin. Flat-pack board has no give, so you cannot bend it around a wheel arch or a seat back. An estate or an SUV with the rear bench down handles it comfortably. Load the long box first, on its edge and angled towards the far corner, then slide the second one alongside.

Frequently asked questions

Find quick answers about fit for KALLAX Shelf unit, white, 43 7/8x57 5/8 " in Alfa Romeo Giulietta 2017, including seats up vs seats down, limiting factor, best orientation, and package-by-package margins.

Will KALLAX Shelf unit, white, 43 7/8x57 5/8 " fit in Alfa Romeo Giulietta 2017?

Maybe. With seats down, this is a borderline fit at Opening width (+⅞″). Best orientation: diagonal.

What is the tightest part?

The limiting factor is Opening width, with +⅞″ margin in seats down.

What can I try to make it work?

Use diagonal loading and focus on opening width. Keep the narrow edge leading while entering the opening. Load diagonally first, then straighten once inside.

Can I load it diagonally?

Yes, diagonal is the best orientation for this check, with +⅞″ around the limiting point.

Do all packages fit in the car at the same time?

We test each package individually. All packages fitting individually does not guarantee they will fit stacked together. You may need multiple trips.

Does it fit with seats up or seats down?

Seats up: No (-13⅞″). Seats down: Maybe (+⅞″). Default selection follows YES > MAYBE > NO.

Which package is the hardest to load?

Package #1 (56½″ × 16″ × 5″) is the tightest, with +⅞″ at Opening width.

Do I need to fold the seats?

Results differ by configuration. Seats up is No and seats down is Maybe.

Is the trunk opening the issue?

Yes. The tightest constraint is at the opening (Opening width) with +⅞″ margin.

What could change the result in real life?

Cargo liners, wheel-arch bumps, the trunk cover, and items already in the trunk can reduce usable space. Measure the tightest point if the fit is close.