
KALLAX Shelf unit, white, 43 7/8x57 5/8″
+4⅝″ margin
All items that fit a Peugeot 308 2022
Maybe, it's a tight fit.

Fit Details

KALLAX Shelf unit, white, 16 3/8x57 5/8″
Box: 60¾″ × 16″ × 4¾″ · 39 lb 11 oz
Based on IKEA US (United States).
Package dimensions last checked and updated on Oct 21, 2026
Package
Status
Limiting factor
Best orientation
Package #1
60¾″ × 16″ × 4¾″
Status:+1½″, tight
Limited by
Limiting factor:Cargo length
Best orientation:Diagonal
Vehicle limits

Opening width / height above sill
37¾″ / 22½″
Cargo width / height
32¼″ / 29⅛″
Cargo length seats up / down
30¾″ / 58¼″
Loading sill height
27½″
Peugeot 308 2022
Measurements last checked and updated on Oct 21, 2026
Helpful tips
Use these loading tips to improve your chances of fitting KALLAX Shelf unit, white, 16 3/8x57 5/8″ in Peugeot 308 2022.
Use available cargo length
Push the package fully toward the seat backs to use all cargo length.
Load diagonally first
Load diagonally first, then straighten once inside.
Clear real-world obstacles
Clear the trunk before loading. Existing cargo, trunk cover, and wheel-arch bumps can reduce usable space.
Alternatives that fit in Peugeot 308 2022
Ranked by fit margin and package-dimension similarity. This improves as we index more items.
About the Peugeot 308 2022 boot
Two figures matter most in the 308's boot. The first is height: 22½″ of clear height above the loading sill, with the floor 6¾″ below that sill. The second is width: the opening is 37¾″ across, but the floor narrows to 32¼″. Seats up, you get 30¾″ of floor for a few small boxes. Fold the rear seats and the floor reaches 58¼″, which is where long flat packs belong. Tall boxes go in lying down. The sill sits 27½″ off the ground. Measure each box's height and width before you lift it, not halfway in.
About the KALLAX Shelf unit, white, 16 3/8x57 5/8″ package
A slim box can still be a two-person job. This KALLAX is one box of 60¾″ × 16″ × 4¾″ that weighs 39 lb 11 oz, and its length is what makes it awkward. A box this long is hard to steer on your own, and the far end goes where you cannot see it. Lying flat and straight, it needs 60¾″ of boot floor. Turned on its side and angled across the floor, it can fit in a shorter boot. Ask someone to take the far end, even for the short walk to the car, and let them guide it in while you push.
Frequently asked questions
Find quick answers about fit for KALLAX Shelf unit, white, 16 3/8x57 5/8″ in Peugeot 308 2022, including seats up vs seats down, limiting factor, best orientation, and package-by-package margins.
Will KALLAX Shelf unit, white, 16 3/8x57 5/8″ fit in Peugeot 308 2022?
Maybe. With seats down, it fits on paper with 1½″ to spare at Cargo length, less than the 2⅜″ a clear yes needs. Best orientation: diagonal.
What is the tightest part?
The limiting factor is Cargo length, with +1½″ margin in seats down.
What can I try to make it work?
Use diagonal loading and focus on cargo length. Push the package fully toward the seat backs to use all cargo length. Load diagonally first, then straighten once inside.
Can I load it diagonally?
Yes, diagonal is the best orientation for this check, with +1½″ around the limiting point.
Which loading orientation works best?
Diagonal is the best orientation for this result in seats down.
Does it fit with seats up or seats down?
Seats up: No (-14¾″). Seats down: Maybe (+1½″). Default selection follows YES > MAYBE > NO.
What do YES, MAYBE and NO mean here?
YES means there is at least 2⅜″ to spare at the tightest point, in the best way the box can go in. MAYBE means it fits on paper, but with less than 2⅜″ to spare, so trim, the parcel shelf or the loading angle can decide it. NO means the box is bigger than the space at its tightest point, whichever way it goes in. Every margin on this page is that real gap: the car's measurement minus the box's.
Do I need to fold the seats?
Results differ by configuration. Seats up is No and seats down is Maybe.
What could change the result in real life?
Cargo liners, wheel-arch bumps, the trunk cover, and items already in the trunk can reduce usable space. Measure the tightest point if the fit is close.
How tight is this fit?
This result is in the borderline band (+1½″ at Cargo length).