Willfit in a?

No, it won't fit.

It will not fit in this setup: KALLAX Shelf unit, white, 30 1/8x57 5/8 " is too large for a Peugeot 208 2020 with seats up.

Peugeot 208 2020

Fit Details

With seats up, This package will not fit in this setup. The blocker is opening width, and you're short by 18⅞″ even with diagonal loading. We're about 95% confident in this estimate.

KALLAX Shelf unit, white, 30 1/8x57 5/8 "

KALLAX Shelf unit, white, 30 1/8x57 5/8 "

Box: 59″ × 16″ × 6½″ · 68 lb 5 oz

Based on IKEA US (United States).

Package dimensions last checked and updated on Jun 19, 2026

  • Package #1

    59″ × 16″ × 6½″

    Status:18⅞″ short

    Limiting factor:Opening width

    Best orientation:Diagonal

Vehicle limits

Trunk limits for Peugeot 208 2020

Opening width / height

33⅞″ / 29½″

Cargo width / height

37¾″ / 36⅝″

Cargo length seats up / down

26⅜″ / 51⅝″

Loading sill height

28″

Peugeot 208 2020

Measurements last checked and updated on Jun 23, 2026

Helpful tips

Use these loading tips to improve your chances of fitting KALLAX Shelf unit, white, 30 1/8x57 5/8 " in Peugeot 208 2020.

  • Optimize opening width

    Keep the narrow edge leading while entering the opening.

  • Load diagonally first

    Load diagonally first, then straighten once inside.

  • Try fitting alternatives

    Check the Similar items that fit section for safer alternatives.

About the Peugeot 208 2020 boot

The Peugeot 208 2020 gives you a compact boot with a fairly narrow mouth. The opening is 33⅞″ wide by 29½″ tall, and the floor behind it runs 26⅜″ with the seats up. Drop the rear bench and the floor opens to 51⅝″, a gain of 25¼″, which nearly doubles your length. Across the floor the narrow point is 37¾″. It swallows weekly shopping and soft bags easily, but a wide rigid box can catch on that 33⅞″ opening. The sill stands 28″ high with a gentle 7⅛″ drop inside, so rest the load on the lip and push it in.

About the KALLAX Shelf unit, white, 30 1/8x57 5/8 " package

The KALLAX comes as a single flat carton, 59″ × 16″ × 6½″, and it carries real weight at 68 lb 5 oz for one box. It is a stiff, square-edged panel pack: not long enough to be unmanageable, but wide at 16″ and heavy enough that you will not want to hold it out at arm's length. A hatchback with the rear seats folded usually takes it, and an estate or SUV takes it without thinking. The weight is the thing to plan for. Keep it flat, slide it across the boot floor, and load it last.

Frequently asked questions

Find quick answers about fit for KALLAX Shelf unit, white, 30 1/8x57 5/8 " in Peugeot 208 2020, including seats up vs seats down, limiting factor, best orientation, and package-by-package margins.

Will KALLAX Shelf unit, white, 30 1/8x57 5/8 " fit in Peugeot 208 2020?

No. With seats up, it is short by 18⅞″ at Opening width, even with diagonal loading.

What is the tightest part?

The limiting factor is Opening width, with -18⅞″ margin in seats up.

What should I do instead?

Use the Helpful tips & alternatives section to choose a smaller item, different orientation, or split-load plan.

Is the trunk opening the issue?

Yes. The tightest constraint is at the opening (Opening width) with -18⅞″ margin.

How tight is this fit?

This result is in the clear no-fit band (-18⅞″ at Opening width).

Does it fit with seats up or seats down?

Seats up: No (-18⅞″). Seats down: No (-5¾″). Default selection follows YES > MAYBE > NO.

Why does it not fit?

The blocker is Opening width. The worst margin is -18⅞″ in seats up, so clearance is below the required buffer.

Can I load it diagonally?

Yes, diagonal is the best orientation for this check, with -18⅞″ around the limiting point.

Which loading orientation works best?

Diagonal is the best orientation for this result in seats up.

How confident is this result?

Confidence is 95 out of 100 based on available dimensions and margin tightness.