
KALLAX Shelf unit, white, 16 3/8x57 5/8″
+2⅝″ margin
All items that fit a BMW 1 Series 2020
Yes, it will fit!

Fit Details

KALLAX Shelf unit, white, 30 1/8x57 5/8″
Box: 59″ × 15¾″ × 6½″ · 68 lb 5 oz
Based on IKEA US (United States).
Package dimensions last checked and updated on Oct 21, 2026
Package
Status
Limiting factor
Best orientation
Package #1
59″ × 15¾″ × 6½″
Status:+2⅞″ to spare
Limited by
Limiting factor:Cargo length
Best orientation:Diagonal
Vehicle limits

Opening width / height above sill
37⅜″ / 22⅞″
Cargo width / height
40⅛″ / 26″
Cargo length seats up / down
29½″ / 57½″
Loading sill height
27½″
BMW 1 Series 2020
Measurements last checked and updated on Oct 21, 2026
Helpful tips
Use these loading tips to improve your chances of fitting KALLAX Shelf unit, white, 30 1/8x57 5/8″ in BMW 1 Series 2020.
Use available cargo length
Push the package fully toward the seat backs to use all cargo length.
Load diagonally first
Load diagonally first, then straighten once inside.
Clear real-world obstacles
Clear the trunk before loading. Existing cargo, trunk cover, and wheel-arch bumps can reduce usable space.
Other items to check in BMW 1 Series 2020
Ranked by fit margin and package-dimension similarity. This improves as we index more items.
About the BMW 1 Series 2020 boot
The way into the 1 Series boot is low: 22⅞″ of clear height above the loading sill, through an opening 37⅜″ wide, while the boot itself is 26″ tall from its floor. That makes tall boxes a poor fit. The sill is 27½″ high and the floor sits 3⅛″ below it. With the rear seats up the floor is 29½″ long and 40⅛″ wide at its narrowest, and folding them adds 28″, giving 57½″ for long flat packs. If a long box will not go in lying flat, try it standing on its side: at an angle, it then needs less of the 37⅜″ width.
About the KALLAX Shelf unit, white, 30 1/8x57 5/8″ package
One box sounds easy until you lift it. This KALLAX travels as a single 59″ × 15¾″ × 6½″ box that weighs 68 lb 5 oz, and all that weight sits in a long, narrow shape you cannot easily hold close to your body. Lying flat and straight, it needs 59″ of boot floor. On its side and at an angle, it can fit in a shorter boot. Use two people, and agree which way it goes in before anyone lifts, so the heavy part of the job happens only once. Then lift together on a count and carry it level.
Frequently asked questions
Find quick answers about fit for KALLAX Shelf unit, white, 30 1/8x57 5/8″ in BMW 1 Series 2020, including seats up vs seats down, limiting factor, best orientation, and package-by-package margins.
Will KALLAX Shelf unit, white, 30 1/8x57 5/8″ fit in BMW 1 Series 2020?
Yes. With seats down, it fits with 2⅞″ to spare at Cargo length. Best orientation: diagonal.
What is the tightest part?
The limiting factor is Cargo length, with +2⅞″ margin in seats down.
Do I need to fold the seats?
Results differ by configuration. Seats up is No and seats down is Yes.
What could change the result in real life?
Cargo liners, wheel-arch bumps, the trunk cover, and items already in the trunk can reduce usable space. Measure the tightest point if the fit is close.
How tight is this fit?
This result is in the tight positive clearance band (+2⅞″ at Cargo length).
Does it fit with seats up or seats down?
Seats up: No (-12⅝″). Seats down: Yes (+2⅞″). Default selection follows YES > MAYBE > NO.
What do YES, MAYBE and NO mean here?
YES means there is at least 2⅜″ to spare at the tightest point, in the best way the box can go in. MAYBE means it fits on paper, but with less than 2⅜″ to spare, so trim, the parcel shelf or the loading angle can decide it. NO means the box is bigger than the space at its tightest point, whichever way it goes in. Every margin on this page is that real gap: the car's measurement minus the box's.
Can I load it diagonally?
Yes, diagonal is the best orientation for this check, with +2⅞″ around the limiting point.
Which loading orientation works best?
Diagonal is the best orientation for this result in seats down.
How confident is this result?
Confidence is 95 out of 100 based on available dimensions and margin tightness.