Willfit in a?

No, it won't fit.

It will not fit in this setup: IVAR Shelving unit, pine, 35x11 3/4x70 1/2 " is too large for a Renault Captur 2024 with seats up.

Renault Captur 2024

Fit Details

With seats up, This package will not fit in this setup. The blocker is opening width, and you're short by 21½″ even with diagonal loading. We're about 95% confident in this estimate.

IVAR Shelving unit, pine, 35x11 3/4x70 1/2 "

IVAR Shelving unit, pine, 35x11 3/4x70 1/2 "

Box: 70½″ × 3½″ × 1¾″ · 6 lb 1 oz

Based on IKEA US (United States).

Package dimensions last checked and updated on Jul 08, 2026

  • Package #1

    70½″ × 3½″ × 1¾″

    Status:21½″ short

    Limiting factor:Opening width

    Best orientation:Diagonal

Vehicle limits

Trunk limits for Renault Captur 2024

Opening width / height

37″ / 32¼″

Cargo width / height

40⅛″ / 40⅛″

Cargo length seats up / down

26⅜″ / 56¾″

Loading sill height

30¾″

Renault Captur 2024

Measurements last checked and updated on Jul 08, 2026

About the Renault Captur 2024 boot

The Captur gives you a compact, upright boot rather than a long one. Behind the rear seats the floor runs about 26 3/8 inches, so tall or square boxes load fine but anything long sits at an angle. The opening is 37 inches wide and 32 1/4 inches tall, and there is a 7 7/8 inch drop from the sill down to the floor, so you lift over a lip then set down. Fold the rear bench and the floor stretches to 56 3/4 inches, a gain of 30 3/8 inches that changes what the car can take. Slide long boxes in low and straight down the 40 1/8 inch centre channel.

About the IVAR Shelving unit, pine, 35x11 3/4x70 1/2 " package

The IVAR shelving unit packs into one long, slim box: 70 1/2 inches long, 3 1/2 inches wide, and just 1 3/4 inches thick. At 6 lb 1 oz it is light, so the problem is never the weight, it is the length. That 70 1/2 inches of rigid pine will not bend around a wheel arch or a seat back, so a short boot forces it across the cabin at an angle. An estate or a hatchback with the rear seats down takes it easily. Load it flat and straight, thin edge up, and rest the far end against a seat back so it cannot slide when you brake.

Frequently asked questions

Find quick answers about fit for IVAR Shelving unit, pine, 35x11 3/4x70 1/2 " in Renault Captur 2024, including seats up vs seats down, limiting factor, best orientation, and package-by-package margins.

Will IVAR Shelving unit, pine, 35x11 3/4x70 1/2 " fit in Renault Captur 2024?

No. With seats up, it is short by 21½″ at Opening width, even with diagonal loading.

What is the tightest part?

The limiting factor is Opening width, with -21½″ margin in seats up.

What should I do instead?

Use the Helpful tips & alternatives section to choose a smaller item, different orientation, or split-load plan.

Is the trunk opening the issue?

Yes. The tightest constraint is at the opening (Opening width) with -21½″ margin.

How tight is this fit?

This result is in the clear no-fit band (-21½″ at Opening width).

Does it fit with seats up or seats down?

Seats up: No (-21½″). Seats down: No (-6″). Default selection follows YES > MAYBE > NO.

Why does it not fit?

The blocker is Opening width. The worst margin is -21½″ in seats up, so clearance is below the required buffer.

Can I load it diagonally?

Yes, diagonal is the best orientation for this check, with -21½″ around the limiting point.

Which loading orientation works best?

Diagonal is the best orientation for this result in seats up.

How confident is this result?

Confidence is 95 out of 100 based on available dimensions and margin tightness.