
BRIMNES TV unit, black, 47 1/4x16 1/8x20 7/8 "
+10⅞″ margin
Maybe, it's a tight fit.

Fit Details

IVAR Shelving unit, pine, 35x11 3/4x70 1/2 "
Box: 70½″ × 3½″ × 1¾″ · 6 lb 1 oz
Based on IKEA US (United States).
Package dimensions last checked and updated on Jul 08, 2026
Package
Status
Limiting factor
Best orientation
Package #1
70½″ × 3½″ × 1¾″
Status:-⅝″ tight
Limited by
Limiting factor:Opening width
Best orientation:Diagonal
Vehicle limits

Opening width / height
37¾″ / 29⅛″
Cargo width / height
32¼″ / 35⅞″
Cargo length seats up / down
30¾″ / 58¼″
Loading sill height
27½″
Peugeot 308 2022
Measurements last checked and updated on Jul 06, 2026
Helpful tips
Use these loading tips to improve your chances of fitting IVAR Shelving unit, pine, 35x11 3/4x70 1/2 " in Peugeot 308 2022.
Optimize opening width
Keep the narrow edge leading while entering the opening.
Load diagonally first
Load diagonally first, then straighten once inside.
Clear real-world obstacles
Clear the trunk before loading. Existing cargo, trunk cover, and wheel-arch bumps can reduce usable space.
Alternatives that fit in Peugeot 308 2022
Ranked by fit margin and package-dimension similarity. This improves as we index more items.
About the Peugeot 308 2022 boot
The Peugeot 308 gives you a hatchback boot that is short but usefully deep. The opening measures 37¾″ wide by 29⅛″ tall, and the floor runs 30¾″ with the seats up, stretching to 58¼″ once you fold the rear bench, a gain of 27½″. The narrow point of the floor is 32¼″ across, so wide flat loads sit fine, but anything past 30¾″ long needs the seats down. The load lip sits 27½″ off the ground with a 6¾″ drop to the floor, so heavy boxes take a short lift then settle low. It takes suitcases and boxed furniture well, long flat-pack less so. Fold the seats before you load, not halfway through.
About the IVAR Shelving unit, pine, 35x11 3/4x70 1/2 " package
The IVAR shelving unit packs into one long, slim box: 70 1/2 inches long, 3 1/2 inches wide, and just 1 3/4 inches thick. At 6 lb 1 oz it is light, so the problem is never the weight, it is the length. That 70 1/2 inches of rigid pine will not bend around a wheel arch or a seat back, so a short boot forces it across the cabin at an angle. An estate or a hatchback with the rear seats down takes it easily. Load it flat and straight, thin edge up, and rest the far end against a seat back so it cannot slide when you brake.
Frequently asked questions
Find quick answers about fit for IVAR Shelving unit, pine, 35x11 3/4x70 1/2 " in Peugeot 308 2022, including seats up vs seats down, limiting factor, best orientation, and package-by-package margins.
Will IVAR Shelving unit, pine, 35x11 3/4x70 1/2 " fit in Peugeot 308 2022?
Maybe. With seats down, this is a borderline fit at Opening width (-⅝″). Best orientation: diagonal.
What is the tightest part?
The limiting factor is Opening width, with -⅝″ margin in seats down.
Do I need to fold the seats?
Results differ by configuration. Seats up is No and seats down is Maybe.
Is the trunk opening the issue?
Yes. The tightest constraint is at the opening (Opening width) with -⅝″ margin.
Which loading orientation works best?
Diagonal is the best orientation for this result in seats down.
Does it fit with seats up or seats down?
Seats up: No (-15⅜″). Seats down: Maybe (-⅝″). Default selection follows YES > MAYBE > NO.
What can I try to make it work?
Use diagonal loading and focus on opening width. Keep the narrow edge leading while entering the opening. Load diagonally first, then straighten once inside.
Can I load it diagonally?
Yes, diagonal is the best orientation for this check, with -⅝″ around the limiting point.
What could change the result in real life?
Cargo liners, wheel-arch bumps, the trunk cover, and items already in the trunk can reduce usable space. Measure the tightest point if the fit is close.
How tight is this fit?
This result is in the borderline band (-⅝″ at Opening width).