
RIGGA Clothes rack, white
+20¼″ margin
Yes, it will fit!

Fit Details

IVAR Shelving unit, pine, 35x11 3/4x70 1/2 "
Box: 70½″ × 3½″ × 1¾″ · 6 lb 1 oz
Based on IKEA US (United States).
Package dimensions last checked and updated on Aug 06, 2026
Package
Status
Limiting factor
Best orientation
Package #1
70½″ × 3½″ × 1¾″
Status:+2⅜″ margin
Limited by
Limiting factor:Cargo length
Best orientation:Diagonal
Package #2
40¼″ × ¾″ × ½″
Status:+26″ margin
Limited by
Limiting factor:Cargo width
Best orientation:Diagonal
Package #3
32¾″ × 11¾″ × ¾″
Status:+26⅞″ margin
Limited by
Limiting factor:Cargo width
Best orientation:Straight
Vehicle limits

Opening width / height
40⅛″ / 30¾″
Cargo width / height
39¾″ / 35″
Cargo length seats up / down
39″ / 65¾″
Loading sill height
31½″
Peugeot 3008 2025
Measurements last checked and updated on Jul 19, 2026
Helpful tips
Use these loading tips to improve your chances of fitting IVAR Shelving unit, pine, 35x11 3/4x70 1/2 " in Peugeot 3008 2025.
Use available cargo length
Push the package fully toward the seat backs to use all cargo length.
Load diagonally first
Load diagonally first, then straighten once inside.
Plan package order
Load each package one at a time. Individual package fit does not guarantee all packages will fit stacked together.
Other items to check in Peugeot 3008 2025
Ranked by fit margin and package-dimension similarity. This improves as we index more items.
About the Peugeot 3008 2025 boot
The 3008 gives you a wide, square cargo area. The liftgate opening measures 40⅛″ wide × 30¾″ tall and the floor stays 39¾″ across at its narrowest, so you keep almost full width right to the back. With the rear seats up you get 39″ of floor, which suits boxed appliances and shorter flat packs. Fold the bench and you gain 26¾″, taking the floor to 65¾″, the biggest single change you can make here. The load lip sits 31½″ off the ground with a 4⅜″ drop to the floor, so lift high, then slide down and forward.
About the IVAR Shelving unit, pine, 35x11 3/4x70 1/2 " package
The IVAR shelving unit packs into one long, slim box: 70 1/2 inches long, 3 1/2 inches wide, and just 1 3/4 inches thick. At 6 lb 1 oz it is light, so the problem is never the weight, it is the length. That 70 1/2 inches of rigid pine will not bend around a wheel arch or a seat back, so a short boot forces it across the cabin at an angle. An estate or a hatchback with the rear seats down takes it easily. Load it flat and straight, thin edge up, and rest the far end against a seat back so it cannot slide when you brake.
Frequently asked questions
Find quick answers about fit for IVAR Shelving unit, pine, 35x11 3/4x70 1/2 " in Peugeot 3008 2025, including seats up vs seats down, limiting factor, best orientation, and package-by-package margins.
Will IVAR Shelving unit, pine, 35x11 3/4x70 1/2 " fit in Peugeot 3008 2025?
Yes. With seats down, it fits with +2⅜″ at Cargo length. Best orientation: diagonal.
What is the tightest part?
The limiting factor is Cargo length, with +2⅜″ margin in seats down.
Do I need to fold the seats?
Results differ by configuration. Seats up is No and seats down is Yes.
Do all packages fit in the car at the same time?
We test each package individually. All packages fitting individually does not guarantee they will fit stacked together. You may need multiple trips.
Which loading orientation works best?
Diagonal is the best orientation for this result in seats down.
Does it fit with seats up or seats down?
Seats up: No (-12½″). Seats down: Yes (+2⅜″). Default selection follows YES > MAYBE > NO.
Which package is the hardest to load?
Package #1 (70½″ × 3½″ × 1¾″) is the tightest, with +2⅜″ at Cargo length.
Can I load it diagonally?
Yes, diagonal is the best orientation for this check, with +2⅜″ around the limiting point.
Do all packages fit?
Yes. All 3 packages fit individually in seats down. The tightest one is Package #1 (70½″ × 3½″ × 1¾″).
How tight is this fit?
This result is in the tight positive clearance band (+2⅜″ at Cargo length).