
RIGGA Clothes rack, white
+22½″ margin
Yes, it will fit!

Fit Details

IVAR Shelving unit, pine, 35x11 3/4x70 1/2 "
Box: 70½″ × 3½″ × 1¾″ · 6 lb 1 oz
Based on IKEA US (United States).
Package dimensions last checked and updated on Aug 06, 2026
Package
Status
Limiting factor
Best orientation
Package #1
70½″ × 3½″ × 1¾″
Status:+3⅞″ margin
Limited by
Limiting factor:Opening width
Best orientation:Diagonal
Package #2
40¼″ × ¾″ × ½″
Status:+27″ margin
Limited by
Limiting factor:Opening height
Best orientation:Diagonal
Package #3
32¾″ × 11¾″ × ¾″
Status:+26¾″ margin
Limited by
Limiting factor:Opening height
Best orientation:Straight
Vehicle limits

Opening width / height
40⅛″ / 28¾″
Cargo width / height
41″ / 28¾″
Cargo length seats up / down
35⅞″ / 68⅛″
Loading sill height
28¾″
Hyundai Tucson 2025
Measurements last checked and updated on Jun 25, 2026
Helpful tips
Use these loading tips to improve your chances of fitting IVAR Shelving unit, pine, 35x11 3/4x70 1/2 " in Hyundai Tucson 2025.
Optimize opening width
Keep the narrow edge leading while entering the opening.
Load diagonally first
Load diagonally first, then straighten once inside.
Plan package order
Load each package one at a time. Individual package fit does not guarantee all packages will fit stacked together.
Other items to check in Hyundai Tucson 2025
Ranked by fit margin and package-dimension similarity. This improves as we index more items.
About the Hyundai Tucson 2025 boot
The Tucson's boot is a square, usable space that changes character when you fold the rear seats. With them up you get 35⅞″ of floor length behind a 40⅛″ wide by 28¾″ tall opening. Fold the bench and the floor stretches to 68⅛″, a gain of 32¼″, which is the boot's strongest trait. The floor stays a healthy 41″ across at its narrowest, so flat boxes sit well. The load lip is level with the floor, no drop to lift over. Long flat-pack panels only work once the seats are down, so plan around that fold.
About the IVAR Shelving unit, pine, 35x11 3/4x70 1/2 " package
The IVAR shelving unit packs into one long, slim box: 70 1/2 inches long, 3 1/2 inches wide, and just 1 3/4 inches thick. At 6 lb 1 oz it is light, so the problem is never the weight, it is the length. That 70 1/2 inches of rigid pine will not bend around a wheel arch or a seat back, so a short boot forces it across the cabin at an angle. An estate or a hatchback with the rear seats down takes it easily. Load it flat and straight, thin edge up, and rest the far end against a seat back so it cannot slide when you brake.
Frequently asked questions
Find quick answers about fit for IVAR Shelving unit, pine, 35x11 3/4x70 1/2 " in Hyundai Tucson 2025, including seats up vs seats down, limiting factor, best orientation, and package-by-package margins.
Will IVAR Shelving unit, pine, 35x11 3/4x70 1/2 " fit in Hyundai Tucson 2025?
Yes. With seats down, it fits with +3⅞″ at Opening width. Best orientation: diagonal.
What is the tightest part?
The limiting factor is Opening width, with +3⅞″ margin in seats down.
Do I need to fold the seats?
Results differ by configuration. Seats up is No and seats down is Yes.
Is the trunk opening the issue?
Yes. The tightest constraint is at the opening (Opening width) with +3⅞″ margin.
Do all packages fit?
Yes. All 3 packages fit individually in seats down. The tightest one is Package #1 (70½″ × 3½″ × 1¾″).
Does it fit with seats up or seats down?
Seats up: No (-14⅝″). Seats down: Yes (+3⅞″). Default selection follows YES > MAYBE > NO.
Which package is the hardest to load?
Package #1 (70½″ × 3½″ × 1¾″) is the tightest, with +3⅞″ at Opening width.
Can I load it diagonally?
Yes, diagonal is the best orientation for this check, with +3⅞″ around the limiting point.
Do all packages fit in the car at the same time?
We test each package individually. All packages fitting individually does not guarantee they will fit stacked together. You may need multiple trips.
Which loading orientation works best?
Diagonal is the best orientation for this result in seats down.