Willfit in a?

No, it won't fit.

For HEMNES Daybed frame with 3 drawers, white, Twin in a Peugeot 3008 2025 with seats up: no package is a clear yes; 1 package is borderline, and 3 packages do not fit.

Peugeot 3008 2025

Fit Details

With seats up, Not a fit in this setup. 1 package is borderline, and 3 do not fit. Worst case is Package #1 (80¾″ × 11½″ × 2¼″), short by 20¼″ at opening width. We're about 95% confident in this estimate.

HEMNES Daybed frame with 3 drawers, white, Twin

HEMNES Daybed frame with 3 drawers, white, Twin

Box: 80¾″ × 11½″ × 2¼″ · 47 lb 6 oz

Based on IKEA US (United States).

Package dimensions last checked and updated on Jun 20, 2026

  • Package #1

    80¾″ × 11½″ × 2¼″

    Status:20¼″ short

    Limiting factor:Opening width

    Best orientation:Diagonal

  • Package #2

    80½″ × 20¾″ × 2¼″

    Status:20″ short

    Limiting factor:Opening width

    Best orientation:Diagonal

  • Package #3

    41″ × 32½″ × 3¼″

    Status:2″ short

    Limiting factor:Opening width

    Best orientation:Straight

  • Package #4

    39¼″ × 33″ × 3¼″

    Status:-¼″ tight

    Limiting factor:Opening width

    Best orientation:Straight

Vehicle limits

Trunk limits for Peugeot 3008 2025

Opening width / height

40⅛″ / 30¾″

Cargo width / height

39¾″ / 35″

Cargo length seats up / down

39″ / 65¾″

Loading sill height

31½″

Peugeot 3008 2025

Measurements last checked and updated on Jul 19, 2026

Helpful tips

Use these loading tips to improve your chances of fitting HEMNES Daybed frame with 3 drawers, white, Twin in Peugeot 3008 2025.

  • Optimize opening width

    Keep the narrow edge leading while entering the opening.

  • Load diagonally first

    Load diagonally first, then straighten once inside.

  • Plan package order

    Load each package one at a time. Individual package fit does not guarantee all packages will fit stacked together.

  • Try fitting alternatives

    Check the Similar items that fit section for safer alternatives.

About the Peugeot 3008 2025 boot

The 3008 gives you a wide, square cargo area. The liftgate opening measures 40⅛″ wide × 30¾″ tall and the floor stays 39¾″ across at its narrowest, so you keep almost full width right to the back. With the rear seats up you get 39″ of floor, which suits boxed appliances and shorter flat packs. Fold the bench and you gain 26¾″, taking the floor to 65¾″, the biggest single change you can make here. The load lip sits 31½″ off the ground with a 4⅜″ drop to the floor, so lift high, then slide down and forward.

About the HEMNES Daybed frame with 3 drawers, white, Twin package

The HEMNES daybed is a long, flat, heavy load. The largest box measures 80¾″ by 11½″ by 2¼″, so it behaves like a plank: easy to slide, awkward to turn in a tight space. It splits into four packages, and the full set weighs 224 lb, so this is a two-person lift, not a solo one. That 80¾″ length rules out most boots unless you fold the rear seats, which is why an estate, a large SUV or a hatchback with the bench down suits it best. Load the long frame box first, flat along the floor, then stack the lighter drawer boxes on top.

Frequently asked questions

Find quick answers about fit for HEMNES Daybed frame with 3 drawers, white, Twin in Peugeot 3008 2025, including seats up vs seats down, limiting factor, best orientation, and package-by-package margins.

Will HEMNES Daybed frame with 3 drawers, white, Twin fit in Peugeot 3008 2025?

No. With seats up, it is short by 20¼″ at Opening width, even with diagonal loading.

What is the tightest part?

The limiting factor is Opening width, with -20¼″ margin in seats up.

Why does it not fit?

The blocker is Opening width. The worst margin is -20¼″ in seats up, so clearance is below the required buffer.

Can I load it diagonally?

Yes, diagonal is the best orientation for this check, with -20¼″ around the limiting point.

Do all packages fit in the car at the same time?

We test each package individually. All packages fitting individually does not guarantee they will fit stacked together. You may need multiple trips.

Does it fit with seats up or seats down?

Seats up: No (-20¼″). Seats down: No (-5⅛″). Default selection follows YES > MAYBE > NO.

Which package is the hardest to load?

Package #1 (80¾″ × 11½″ × 2¼″) is the tightest, with -20¼″ at Opening width.

What should I do instead?

Use the Helpful tips & alternatives section to choose a smaller item, different orientation, or split-load plan.

Is the trunk opening the issue?

Yes. The tightest constraint is at the opening (Opening width) with -20¼″ margin.

Which loading orientation works best?

Diagonal is the best orientation for this result in seats up.