
SYVDE Dressing table, white, 39 1/2x19″
+6¼″ margin
All items that fit a BMW X1 2024
No, it won't fit.

Fit Details

HEMNES Daybed frame with 3 drawers, white, Twin
Box: 80¾″ × 11½″ × 2¼″ · 47 lb 6 oz
Based on IKEA US (United States).
Package dimensions last checked and updated on Oct 21, 2026
Package
Status
Limiting factor
Best orientation
Package #1
80¾″ × 11½″ × 2¼″
Status:21″ short
Limited by
Limiting factor:Cargo length
Best orientation:Diagonal
Package #2
80½″ × 20¾″ × 2¼″
Status:20⅞″ short
Limited by
Limiting factor:Cargo length
Best orientation:Diagonal
Package #3
41″ × 32½″ × 3¼″
Status:1¼″ short
Limited by
Limiting factor:Cargo width
Best orientation:Straight
Package #4
39¼″ × 33″ × 3¼″
Status:+½″, tight
Limited by
Limiting factor:Cargo width
Best orientation:Straight
Vehicle limits

Opening width / height above sill
42⅛″ / 27⅛″
Cargo width / height
39¾″ / 28⅜″
Cargo length seats up / down
35⅜″ / 64⅝″
Loading sill height
28″
BMW X1 2024
Measurements last checked and updated on Oct 21, 2026
Helpful tips
Use these loading tips to improve your chances of fitting HEMNES Daybed frame with 3 drawers, white, Twin in BMW X1 2024.
Use available cargo length
Use seats down if available to gain cargo length.
Load diagonally first
Load diagonally first, then straighten once inside.
Plan package order
Load each package one at a time. Individual package fit does not guarantee all packages will fit stacked together.
Try fitting alternatives
Check the Similar items that fit section for safer alternatives.
Alternatives that fit in BMW X1 2024
Ranked by fit margin and package-dimension similarity. This improves as we index more items.
About the BMW X1 2024 boot
Almost no step separates the X1's loading sill from its boot floor: the drop is just 1⅛″, from a sill that stands 28″ high. Above the sill the opening is 42⅛″ wide and 27⅛″ high. Across the floor, the narrowest point is 39¾″, and that is the width a box has to fit. The floor runs 35⅜″ with the rear seats up, and some packs longer than that still fit at an angle on their side. Folding adds 29¼″, for 64⅝″ in all. You only need to lift a long pack as far as the sill: from there it slides the whole way in.
About the HEMNES Daybed frame with 3 drawers, white, Twin package
None of the four HEMNES daybed boxes is light: together they weigh 224 lb. The longest, 80¾″ × 11½″ × 2¼″, is narrow and thin and still weighs 47 lb 6 oz. The other long one is 80½″ × 20¾″ × 2¼″ at 58 lb 11 oz, and the two broad boxes are 41″ × 32½″ × 3¼″ and 39¼″ × 33″ × 3¼″. For the longest box to lie straight, the boot floor has to give it 80¾″. Plan on two people for every box, and carry the narrow one by its ends, with a hand under each.
Frequently asked questions
Find quick answers about fit for HEMNES Daybed frame with 3 drawers, white, Twin in BMW X1 2024, including seats up vs seats down, limiting factor, best orientation, and package-by-package margins.
Will HEMNES Daybed frame with 3 drawers, white, Twin fit in BMW X1 2024?
No. With seats up, it is short by 21″ at Cargo length, even with diagonal loading.
What is the tightest part?
The limiting factor is Cargo length, with -21″ margin in seats up.
Which package is the hardest to load?
Package #1 (80¾″ × 11½″ × 2¼″) is the tightest, with -21″ at Cargo length.
What should I do instead?
Use the Helpful tips & alternatives section to choose a smaller item, different orientation, or split-load plan.
Do all packages fit in the car at the same time?
We test each package individually. All packages fitting individually does not guarantee they will fit stacked together. You may need multiple trips.
Does it fit with seats up or seats down?
Seats up: No (-21″). Seats down: No (-5″). Default selection follows YES > MAYBE > NO.
What do YES, MAYBE and NO mean here?
YES means there is at least 2⅜″ to spare at the tightest point, in the best way the box can go in. MAYBE means it fits on paper, but with less than 2⅜″ to spare, so trim, the parcel shelf or the loading angle can decide it. NO means the box is bigger than the space at its tightest point, whichever way it goes in. Every margin on this page is that real gap: the car's measurement minus the box's.
Why does it not fit?
The blocker is Cargo length: with seats up, the box is 21″ bigger than the space there.
Can I load it diagonally?
Yes, diagonal is the best orientation for this check, with -21″ around the limiting point.
Which loading orientation works best?
Diagonal is the best orientation for this result in seats up.