
KALLAX Shelf unit, white, 30 1/8x30 1/8 "
+1½″ margin
No, it won't fit.

Fit Details

GULLIVER Crib, white, 27 1/2x52 "
Box: 53½″ × 30¾″ × 5″ · 46 lb 5 oz
Based on IKEA US (United States).
Package dimensions last checked and updated on Jul 23, 2026
Package
Status
Limiting factor
Best orientation
Package #1
53½″ × 30¾″ × 5″
Status:13″ short
Limited by
Limiting factor:Opening height
Best orientation:Straight
Vehicle limits

Opening width / height
34¼″ / 18⅞″
Cargo width / height
35⅞″ / 33⅞″
Cargo length seats up / down
30⅜″ / 30⅜″
Loading sill height
36¼″
Alfa Romeo Spider 2008
Measurements last checked and updated on Sep 09, 2026
Helpful tips
Use these loading tips to improve your chances of fitting GULLIVER Crib, white, 27 1/2x52 " in Alfa Romeo Spider 2008.
Manage opening height
Keep the highest edge low at the trunk opening.
Keep a straight loading path
Keep the package straight and level while loading.
Try fitting alternatives
Check the Similar items that fit section for safer alternatives.
Alternatives that fit in Alfa Romeo Spider 2008
Ranked by fit margin and package-dimension similarity. This improves as we index more items.
About the GULLIVER Crib, white, 27 1/2x52 " package
The GULLIVER crib ships as one flat box, 53½″ × 30¾″ × 5″, so it is long, fairly wide and thin. At 46 lb 5 oz it is a two-hand lift, and the awkward part is the 30¾″ width, which is more than plenty of boot openings will take head on. Fold a rear seat and most hatchbacks, estates and SUVs handle it flat. Slide it in diagonally at the door so the width clears the frame, and keep the painted panel faces protected, since a crib side scratches easily.
Frequently asked questions
Find quick answers about fit for GULLIVER Crib, white, 27 1/2x52 " in Alfa Romeo Spider 2008, including seats up vs seats down, limiting factor, best orientation, and package-by-package margins.
Will GULLIVER Crib, white, 27 1/2x52 " fit in Alfa Romeo Spider 2008?
No. With seats up, it is short by 13″ at Opening height, even with straight loading.
What is the tightest part?
The limiting factor is Opening height, with -13″ margin in seats up.
What should I do instead?
Use the Helpful tips & alternatives section to choose a smaller item, different orientation, or split-load plan.
Which loading orientation works best?
Straight is the best orientation for this result in seats up.
How confident is this result?
Confidence is 95 out of 100 based on available dimensions and margin tightness.
Does it fit with seats up or seats down?
Seats up: No (-13″). Seats down: No (-13″). Default selection follows YES > MAYBE > NO.
Why does it not fit?
The blocker is Opening height. The worst margin is -13″ in seats up, so clearance is below the required buffer.
Is the trunk opening the issue?
Yes. The tightest constraint is at the opening (Opening height) with -13″ margin.
How tight is this fit?
This result is in the clear no-fit band (-13″ at Opening height).