Willfit in a?

Maybe, it's a tight fit.

All 4 packages of HEMNES Day-bed frame with 3 drawers, grey-green, 80x200 cm look possible diagonally in a Toyota RAV4 2024 with seats down, but clearances are tight.

Toyota RAV4 2024

Fit Details

With seats down, This looks possible, but tight. All 4 packages are borderline or better; the tightest is Package #1 (205x53x6 cm) at opening width with -0.5 cm (best loaded diagonal). See the Helpful tips section below for practical loading suggestions. We're about 75% confident in this estimate.

HEMNES Day-bed frame with 3 drawers, grey-green, 80x200 cm

HEMNES Day-bed frame with 3 drawers, grey-green, 80x200 cm

Package dimensions last checked and updated on Mar 25, 2026

  • Package #1

    205 x 53 x 6 cm

    Status:-0.5 cm tight

    Limiting factor:Opening width

    Best orientation:Diagonal

  • Package #2

    205 x 29 x 6 cm

    Status:-0.5 cm tight

    Limiting factor:Opening width

    Best orientation:Diagonal

  • Package #3

    100 x 84 x 6 cm

    Status:+13 cm margin

    Limiting factor:Cargo width

    Best orientation:Straight

  • Package #4

    100 x 84 x 6 cm

    Status:+13 cm margin

    Limiting factor:Cargo width

    Best orientation:Straight

Vehicle limits

Trunk limits for Toyota RAV4 2024

Opening width / height

104 cm / 87 cm

Cargo width / height

100 cm / 92 cm

Cargo length seats up / down

101 cm / 181 cm

Loading sill height

69 cm

Toyota RAV4 2024

Measurements last checked and updated on Mar 10, 2026

Helpful tips

Use these loading tips to improve your chances of fitting HEMNES Day-bed frame with 3 drawers, grey-green, 80x200 cm in Toyota RAV4 2024.

  • Optimize opening width

    Keep the narrow edge leading while entering the opening.

  • Load diagonally first

    Load diagonally first, then straighten once inside.

  • Plan package order

    Load each package one at a time. Individual package fit does not guarantee all packages will fit stacked together.

  • Clear real-world obstacles

    Clear the trunk before loading. Existing cargo, trunk cover, and wheel-arch bumps can reduce usable space.

About the Toyota RAV4 2024 boot

The RAV4 2024 is the easy case in this catalogue. The opening runs 104 cm wide by 87 cm tall, the boot floor measures 101 cm long with the seats up and 181 cm folded, and the cargo width stays a consistent 100 cm right back to the rear seats. The sill is a low 69 cm with a 5 cm drop, so you load close to the ground. This boot swallows mid-size flat packs upright, multi-pack loads side by side, and most coffee tables seats up. Anything past 1.8 m still needs the bench folded.

About the HEMNES Day-bed frame with 3 drawers, grey-green, 80x200 cm package

HEMNES Day-bed frame ships in four boxes, with the longest one at 205 cm by 53 cm by 6 cm and a total weight close to 100 kg across the load. The long flat panel is the deciding box: 205 cm rules out hatchbacks and most small SUVs even with the seats folded. You want an estate, a large SUV with a true flat folded floor, or a van. Load the long panel first along the centre line, lay the heavier boxes flat to spread the weight, and bring a second pair of hands for the unload.

On pickup day

The HEMNES day-bed becomes a maybe in your Toyota RAV4 2024 with the rear bench down. Seats up, the longest 205 cm package overshoots the 104 cm boot opening by 48.2 cm on the diagonal. Fold the bench and the boot floor stretches from 101 cm to 181 cm, a 47.7 cm gain, and the long box clears with about 0.5 cm to spare at the opening angle. That is millimetre tolerance, so feed it in slowly, protect the trim, and pull the parcel shelf out. Tape measure check on the day before you load.

Frequently asked questions

Find quick answers about fit for HEMNES Day-bed frame with 3 drawers, grey-green, 80x200 cm in Toyota RAV4 2024, including seats up vs seats down, limiting factor, best orientation, and package-by-package margins.

Will HEMNES Day-bed frame with 3 drawers, grey-green, 80x200 cm fit in Toyota RAV4 2024?

Maybe. With seats down, this is a borderline fit at Opening width (-0.5 cm). Best orientation: diagonal.

What is the tightest part?

The limiting factor is Opening width, with -0.5 cm margin in seats down.

What can I try to make it work?

Use diagonal loading and focus on opening width. Keep the narrow edge leading while entering the opening. Load diagonally first, then straighten once inside.

Can I load it diagonally?

Yes, diagonal is the best orientation for this check, with -0.5 cm around the limiting point.

Do all packages fit in the car at the same time?

We test each package individually. All packages fitting individually does not guarantee they will fit stacked together. You may need multiple trips.

Does it fit with seats up or seats down?

Seats up: No (-48.2 cm). Seats down: Maybe (-0.5 cm). Default selection follows YES > MAYBE > NO.

Which package is the hardest to load?

Package #1 (205x53x6 cm) is the tightest, with -0.5 cm at Opening width.

Do I need to fold the seats?

Results differ by configuration. Seats up is No and seats down is Maybe.

Is the trunk opening the issue?

Yes. The tightest constraint is at the opening (Opening width) with -0.5 cm margin.

What could change the result in real life?

Cargo liners, wheel-arch bumps, the trunk cover, and items already in the trunk can reduce usable space. Measure the tightest point if the fit is close.