Willfit in a?

No, it won't fit.

It will not fit in this setup: PAX Wardrobe frame, white, 100x58x236 cm is too large for a Tesla Model Y 2023 with seats up.

Tesla Model Y 2023

Fit Details

With seats up, This package will not fit in this setup. The blocker is opening width, and you're short by 73.4 cm even with diagonal loading. We're about 95% confident in this estimate.

PAX Wardrobe frame, white, 100x58x236 cm

PAX Wardrobe frame, white, 100x58x236 cm

Package dimensions last checked and updated on Mar 01, 2026

  • Package #1

    245 x 61 x 8 cm

    Status:73.4 cm short

    Limiting factor:Opening width

    Best orientation:Diagonal

Vehicle limits

Trunk limits for Tesla Model Y 2023

Opening width / height

101 cm / 69 cm

Cargo width / height

95 cm / 69 cm

Cargo length seats up / down

111 cm / 194 cm

Loading sill height

70 cm

Tesla Model Y 2023

Measurements last checked and updated on Mar 10, 2026

Helpful tips

Use these loading tips to improve your chances of fitting PAX Wardrobe frame, white, 100x58x236 cm in Tesla Model Y 2023.

  • Optimize opening width

    Keep the narrow edge leading while entering the opening.

  • Load diagonally first

    Load diagonally first, then straighten once inside.

  • Try fitting alternatives

    Check the Similar items that fit section for safer alternatives.

About the Tesla Model Y 2023 boot

The Model Y 2023 has a long load bay and a low rear hatch. You get 111 cm of floor seats up, stretching to 194 cm folded, and the boot floor sits flush with the sill at 70 cm so you slide rather than lift. The narrow point measures 95 cm, plenty for most flat packs, but the opening is only 69 cm tall, so anything bulky has to go in flat. This boot rewards long, low loads: bed slats, bookcase panels, two stacked KALLAX boxes. Tall, square cabinets are the awkward case. Watch the load lip on heavy items.

About the PAX Wardrobe frame, white, 100x58x236 cm package

The PAX 100 frame ships as one flat panel, 245 cm long, 61 cm wide and 8 cm thick. That 2.45 metre length is the wall: hatchbacks and small SUVs do not have the floor for it, even with the seats fully flat. An estate, a long SUV or a van is the right car. At 55 kg the panel is heavy, you need two people. Lay it on its 8 cm edge if your floor allows, or flat on a blanket. Keep a rigid sheet between the panel and any door frame, the laminate scratches on contact with metal trim.

On pickup day

The PAX frame ships in a 245 cm box, and that number settles it for the Tesla Model Y. The boot opening is 101 cm wide, so the box sits 73.4 cm short of getting through with the seats up, even turned diagonally. Folding the rear bench takes the floor from 111 cm to 194 cm, a gain of 51.2 cm, but that does not help, because the box never clears the opening in the first place, still 22.2 cm short folded. A flat-pack this long needs a van, a roof rack or home delivery. Measure your own boot before pickup day, since opening figures shift with trim.

Frequently asked questions

Find quick answers about fit for PAX Wardrobe frame, white, 100x58x236 cm in Tesla Model Y 2023, including seats up vs seats down, limiting factor, best orientation, and package-by-package margins.

Will PAX Wardrobe frame, white, 100x58x236 cm fit in Tesla Model Y 2023?

No. With seats up, it is short by 73.4 cm at Opening width, even with diagonal loading.

What is the tightest part?

The limiting factor is Opening width, with -73.4 cm margin in seats up.

What should I do instead?

Use the Helpful tips & alternatives section to choose a smaller item, different orientation, or split-load plan.

Is the trunk opening the issue?

Yes. The tightest constraint is at the opening (Opening width) with -73.4 cm margin.

How tight is this fit?

This result is in the clear no-fit band (-73.4 cm at Opening width).

Does it fit with seats up or seats down?

Seats up: No (-73.4 cm). Seats down: No (-22.2 cm). Default selection follows YES > MAYBE > NO.

Why does it not fit?

The blocker is Opening width. The worst margin is -73.4 cm in seats up, so clearance is below the required buffer.

Can I load it diagonally?

Yes, diagonal is the best orientation for this check, with -73.4 cm around the limiting point.

Which loading orientation works best?

Diagonal is the best orientation for this result in seats up.

How confident is this result?

Confidence is 95 out of 100 based on available dimensions and margin tightness.