NORDEN Gateleg table, birch, 26/89/152x80 cm
+19 cm margin
WillHOVET Mirror, aluminium, 78x196 cmfit in aTesla Model Y 2023?
No, it won't fit.
It will not fit in this setup: HOVET Mirror, aluminium, 78x196 cm is too large for a Tesla Model Y 2023 with seats up.
Fit Details
With seats up, This package will not fit in this setup. The blocker is opening height, and you're short by 19 cm even with straight loading. We're about 95% confident in this estimate.
HOVET Mirror, aluminium, 78x196 cm
Package dimensions last checked and updated on Mar 01, 2026
Package
Status
Limiting factor
Best orientation
Package #1
204 x 85 x 7 cm
Status:19 cm short
Limited by
Limiting factor:Opening height
Best orientation:Straight
Vehicle limits
Opening width / height
101 cm / 69 cm
Cargo width / height
95 cm / 69 cm
Cargo length seats up / down
111 cm / 194 cm
Loading sill height
70 cm
Tesla Model Y 2023
Measurements last checked and updated on Mar 10, 2026
Helpful tips
Use these loading tips to improve your chances of fitting HOVET Mirror, aluminium, 78x196 cm in Tesla Model Y 2023.
Manage opening height
Keep the highest edge low at the trunk opening.
Keep a straight loading path
Keep the package straight and level while loading.
Try fitting alternatives
Check the Similar items that fit section for safer alternatives.
Alternatives that fit in Tesla Model Y 2023
Ranked by fit margin and package-dimension similarity. This improves as we index more items.
About the Tesla Model Y 2023 boot
The Model Y 2023 has a long load bay and a low rear hatch. You get 111 cm of floor seats up, stretching to 194 cm folded, and the boot floor sits flush with the sill at 70 cm so you slide rather than lift. The narrow point measures 95 cm, plenty for most flat packs, but the opening is only 69 cm tall, so anything bulky has to go in flat. This boot rewards long, low loads: bed slats, bookcase panels, two stacked KALLAX boxes. Tall, square cabinets are the awkward case. Watch the load lip on heavy items.
About the HOVET Mirror, aluminium, 78x196 cm package
The HOVET mirror ships in one flat-pack box, 204 cm long, 85 cm wide and 7 cm thick. Glass is the real concern here, the 15.1 kg weight is light but the panel is fragile and any flex during a turn can crack the surface. The 85 cm width is wider than most flat-pack panels, so even cars that fit the length can struggle on the diagonal. An estate or a tall hatch with seats folded fits it best. Lay it flat on a blanket, never on edge, and brace it against the back of the rear seats.
On pickup day
This is a no, and not a narrow one. With the seats up the HOVET mirror is 19 cm too big at the boot opening, which is only 69 cm tall. Folding the rear seats helps the floor: it stretches from 111 cm to 194 cm and the gap drops to 13 cm, but the limit shifts to cargo length and the answer stays no. The opening height is the real wall here. A 204 cm mirror needs an estate or a van. Check your own boot lip with a tape measure first, since the 69 cm opening leaves no room for optimism.
Frequently asked questions
Find quick answers about fit for HOVET Mirror, aluminium, 78x196 cm in Tesla Model Y 2023, including seats up vs seats down, limiting factor, best orientation, and package-by-package margins.
Will HOVET Mirror, aluminium, 78x196 cm fit in Tesla Model Y 2023?
No. With seats up, it is short by 19 cm at Opening height, even with straight loading.
What is the tightest part?
The limiting factor is Opening height, with -19 cm margin in seats up.
What should I do instead?
Use the Helpful tips & alternatives section to choose a smaller item, different orientation, or split-load plan.
Which loading orientation works best?
Straight is the best orientation for this result in seats up.
How confident is this result?
Confidence is 95 out of 100 based on available dimensions and margin tightness.
Does it fit with seats up or seats down?
Seats up: No (-19 cm). Seats down: No (-13 cm). Default selection follows YES > MAYBE > NO.
Why does it not fit?
The blocker is Opening height. The worst margin is -19 cm in seats up, so clearance is below the required buffer.
Is the trunk opening the issue?
Yes. The tightest constraint is at the opening (Opening height) with -19 cm margin.
How tight is this fit?
This result is in the clear no-fit band (-19 cm at Opening height).