NORDEN Gateleg table, birch, 26/89/152x80 cm
+19 cm margin
WillPAX Wardrobe frame, white, 50x35x236 cmfit in aTesla Model Y 2023?
No, it won't fit.
It will not fit in this setup: PAX Wardrobe frame, white, 50x35x236 cm is too large for a Tesla Model Y 2023 with seats up.
Fit Details
With seats up, This package will not fit in this setup. The blocker is opening width, and you're short by 72 cm even with diagonal loading. We're about 95% confident in this estimate.
PAX Wardrobe frame, white, 50x35x236 cm
Package dimensions last checked and updated on Mar 25, 2026
Package
Status
Limiting factor
Best orientation
Package #1
244 x 50 x 7 cm
Status:72 cm short
Limited by
Limiting factor:Opening width
Best orientation:Diagonal
Vehicle limits
Opening width / height
101 cm / 69 cm
Cargo width / height
95 cm / 69 cm
Cargo length seats up / down
111 cm / 194 cm
Loading sill height
70 cm
Tesla Model Y 2023
Measurements last checked and updated on Mar 10, 2026
Helpful tips
Use these loading tips to improve your chances of fitting PAX Wardrobe frame, white, 50x35x236 cm in Tesla Model Y 2023.
Optimize opening width
Keep the narrow edge leading while entering the opening.
Load diagonally first
Load diagonally first, then straighten once inside.
Try fitting alternatives
Check the Similar items that fit section for safer alternatives.
Alternatives that fit in Tesla Model Y 2023
Ranked by fit margin and package-dimension similarity. This improves as we index more items.
About the Tesla Model Y 2023 boot
The Model Y 2023 has a long load bay and a low rear hatch. You get 111 cm of floor seats up, stretching to 194 cm folded, and the boot floor sits flush with the sill at 70 cm so you slide rather than lift. The narrow point measures 95 cm, plenty for most flat packs, but the opening is only 69 cm tall, so anything bulky has to go in flat. This boot rewards long, low loads: bed slats, bookcase panels, two stacked KALLAX boxes. Tall, square cabinets are the awkward case. Watch the load lip on heavy items.
About the PAX Wardrobe frame, white, 50x35x236 cm package
The PAX 50 frame ships as one flat panel, 244 cm long, 50 cm wide and just 7 cm thick. That length is the deal-breaker, very few hatchbacks will swallow 2.44 metres even with the seats down. An estate, a long-wheelbase SUV or a van handles it cleanly. The 28.1 kg weight is manageable for two people, but the panel is rigid and unforgiving on doorframes. Load it diagonally across the boot, slide it onto a blanket, and protect the corners with cardboard, the laminate edges chip easily.
On pickup day
The Model Y's boot opens 101 cm wide and the PAX carton is 244 cm long. On the diagonal you are short by 72 cm seats up and by 20.9 cm with the rear bench folded. Folding the bench claws back 51.1 cm of margin, but the floor still tops out at 194 cm, under the 244 cm box. The honest move is to borrow an estate or book IKEA delivery. Re-measure the carton in the warehouse before driving over, since IKEA occasionally tweaks packaging year to year.
Frequently asked questions
Find quick answers about fit for PAX Wardrobe frame, white, 50x35x236 cm in Tesla Model Y 2023, including seats up vs seats down, limiting factor, best orientation, and package-by-package margins.
Will PAX Wardrobe frame, white, 50x35x236 cm fit in Tesla Model Y 2023?
No. With seats up, it is short by 72 cm at Opening width, even with diagonal loading.
What is the tightest part?
The limiting factor is Opening width, with -72 cm margin in seats up.
What should I do instead?
Use the Helpful tips & alternatives section to choose a smaller item, different orientation, or split-load plan.
Is the trunk opening the issue?
Yes. The tightest constraint is at the opening (Opening width) with -72 cm margin.
How tight is this fit?
This result is in the clear no-fit band (-72 cm at Opening width).
Does it fit with seats up or seats down?
Seats up: No (-72 cm). Seats down: No (-20.9 cm). Default selection follows YES > MAYBE > NO.
Why does it not fit?
The blocker is Opening width. The worst margin is -72 cm in seats up, so clearance is below the required buffer.
Can I load it diagonally?
Yes, diagonal is the best orientation for this check, with -72 cm around the limiting point.
Which loading orientation works best?
Diagonal is the best orientation for this result in seats up.
How confident is this result?
Confidence is 95 out of 100 based on available dimensions and margin tightness.