KALLAX Shelving unit, white, 147x147 cm
+30.3 cm margin
WillBRIMNES Day-bed frame with 2 drawers, white, 80x200 cmfit in aToyota RAV4 2024?
Maybe, it's a tight fit.
All 3 packages of BRIMNES Day-bed frame with 2 drawers, white, 80x200 cm look possible diagonally in a Toyota RAV4 2024 with seats down, but clearances are tight.
Fit Details
With seats down, This looks possible, but tight. All 3 packages are borderline or better; the tightest is Package #1 (206x59x7 cm) at opening width with -1.9 cm (best loaded diagonal). See the Helpful tips section below for practical loading suggestions. We're about 75% confident in this estimate.
BRIMNES Day-bed frame with 2 drawers, white, 80x200 cm
Package dimensions last checked and updated on Mar 25, 2026
Package
Status
Limiting factor
Best orientation
Package #1
206 x 59 x 7 cm
Status:-1.9 cm tight
Limited by
Limiting factor:Opening width
Best orientation:Diagonal
Package #2
96 x 58 x 9 cm
Status:+39 cm margin
Limited by
Limiting factor:Cargo width
Best orientation:Straight
Package #3
93 x 56 x 9 cm
Status:+41 cm margin
Limited by
Limiting factor:Cargo width
Best orientation:Straight
Vehicle limits
Opening width / height
104 cm / 87 cm
Cargo width / height
100 cm / 92 cm
Cargo length seats up / down
101 cm / 181 cm
Loading sill height
69 cm
Toyota RAV4 2024
Measurements last checked and updated on Mar 10, 2026
Helpful tips
Use these loading tips to improve your chances of fitting BRIMNES Day-bed frame with 2 drawers, white, 80x200 cm in Toyota RAV4 2024.
Optimize opening width
Keep the narrow edge leading while entering the opening.
Load diagonally first
Load diagonally first, then straighten once inside.
Plan package order
Load each package one at a time. Individual package fit does not guarantee all packages will fit stacked together.
Clear real-world obstacles
Clear the trunk before loading. Existing cargo, trunk cover, and wheel-arch bumps can reduce usable space.
Alternatives that fit in Toyota RAV4 2024
Ranked by fit margin and package-dimension similarity. This improves as we index more items.
About the Toyota RAV4 2024 boot
The RAV4 2024 is the easy case in this catalogue. The opening runs 104 cm wide by 87 cm tall, the boot floor measures 101 cm long with the seats up and 181 cm folded, and the cargo width stays a consistent 100 cm right back to the rear seats. The sill is a low 69 cm with a 5 cm drop, so you load close to the ground. This boot swallows mid-size flat packs upright, multi-pack loads side by side, and most coffee tables seats up. Anything past 1.8 m still needs the bench folded.
About the BRIMNES Day-bed frame with 2 drawers, white, 80x200 cm package
The BRIMNES day-bed ships in three flat packs, and the long one is the problem: 206 cm long, 59 cm wide, only 7 cm thick. Stacked weight comes in at 83.8 kg, so two pairs of hands beat one. The 2 m length rules out small hatchbacks even with the bench folded. Estates, large SUVs, and vans take it without drama. For anything in between, plan the diagonal route through the cabin and check the path past the parcel shelf clips. Load the long pack first, then the two shorter boxes on top.
On pickup day
Seats up in your Toyota RAV4, the BRIMNES day-bed does not go in. The largest package is 206 cm long and the boot opening is 104 cm wide, so you sit 49.6 cm short on a diagonal. Drop the rear bench and the floor stretches to 181 cm with 100 cm of width, but you are still 1.9 cm shy of the opening width on the same diagonal. Push the front passenger seat forward, slide the long edge along the load bay, and bring blankets to protect the trim. Tape-measure check on the day.
Frequently asked questions
Find quick answers about fit for BRIMNES Day-bed frame with 2 drawers, white, 80x200 cm in Toyota RAV4 2024, including seats up vs seats down, limiting factor, best orientation, and package-by-package margins.
Will BRIMNES Day-bed frame with 2 drawers, white, 80x200 cm fit in Toyota RAV4 2024?
Maybe. With seats down, this is a borderline fit at Opening width (-1.9 cm). Best orientation: diagonal.
What is the tightest part?
The limiting factor is Opening width, with -1.9 cm margin in seats down.
What can I try to make it work?
Use diagonal loading and focus on opening width. Keep the narrow edge leading while entering the opening. Load diagonally first, then straighten once inside.
Can I load it diagonally?
Yes, diagonal is the best orientation for this check, with -1.9 cm around the limiting point.
Do all packages fit in the car at the same time?
We test each package individually. All packages fitting individually does not guarantee they will fit stacked together. You may need multiple trips.
Does it fit with seats up or seats down?
Seats up: No (-49.6 cm). Seats down: Maybe (-1.9 cm). Default selection follows YES > MAYBE > NO.
Which package is the hardest to load?
Package #1 (206x59x7 cm) is the tightest, with -1.9 cm at Opening width.
Do I need to fold the seats?
Results differ by configuration. Seats up is No and seats down is Maybe.
Is the trunk opening the issue?
Yes. The tightest constraint is at the opening (Opening width) with -1.9 cm margin.
What could change the result in real life?
Cargo liners, wheel-arch bumps, the trunk cover, and items already in the trunk can reduce usable space. Measure the tightest point if the fit is close.