KALLAX Shelving unit, white, 147x147 cm
+40 cm margin
WillBRIMNES Day-bed frame with 2 drawers, white, 80x200 cmfit in aTesla Model Y 2023?
Maybe, it's a tight fit.
All 3 packages of BRIMNES Day-bed frame with 2 drawers, white, 80x200 cm look possible diagonally in a Tesla Model Y 2023 with seats down, but clearances are tight.
Fit Details
With seats down, This looks possible, but tight. All 3 packages are borderline or better; the tightest is Package #1 (206x59x7 cm) at cargo width with +0.2 cm (best loaded diagonal). See the Helpful tips section below for practical loading suggestions. We're about 75% confident in this estimate.
BRIMNES Day-bed frame with 2 drawers, white, 80x200 cm
Package dimensions last checked and updated on Mar 25, 2026
Package
Status
Limiting factor
Best orientation
Package #1
206 x 59 x 7 cm
Status:+0.2 cm tight
Limited by
Limiting factor:Cargo width
Best orientation:Diagonal
Package #2
96 x 58 x 9 cm
Status:+34 cm margin
Limited by
Limiting factor:Cargo width
Best orientation:Straight
Package #3
93 x 56 x 9 cm
Status:+36 cm margin
Limited by
Limiting factor:Cargo width
Best orientation:Straight
Vehicle limits
Opening width / height
101 cm / 69 cm
Cargo width / height
95 cm / 69 cm
Cargo length seats up / down
111 cm / 194 cm
Loading sill height
70 cm
Tesla Model Y 2023
Measurements last checked and updated on Mar 10, 2026
Helpful tips
Use these loading tips to improve your chances of fitting BRIMNES Day-bed frame with 2 drawers, white, 80x200 cm in Tesla Model Y 2023.
Use available cargo width
Center the package between the side walls before final rotation.
Load diagonally first
Load diagonally first, then straighten once inside.
Plan package order
Load each package one at a time. Individual package fit does not guarantee all packages will fit stacked together.
Clear real-world obstacles
Clear the trunk before loading. Existing cargo, trunk cover, and wheel-arch bumps can reduce usable space.
Alternatives that fit in Tesla Model Y 2023
Ranked by fit margin and package-dimension similarity. This improves as we index more items.
About the Tesla Model Y 2023 boot
The Model Y 2023 has a long load bay and a low rear hatch. You get 111 cm of floor seats up, stretching to 194 cm folded, and the boot floor sits flush with the sill at 70 cm so you slide rather than lift. The narrow point measures 95 cm, plenty for most flat packs, but the opening is only 69 cm tall, so anything bulky has to go in flat. This boot rewards long, low loads: bed slats, bookcase panels, two stacked KALLAX boxes. Tall, square cabinets are the awkward case. Watch the load lip on heavy items.
About the BRIMNES Day-bed frame with 2 drawers, white, 80x200 cm package
The BRIMNES day-bed ships in three flat packs, and the long one is the problem: 206 cm long, 59 cm wide, only 7 cm thick. Stacked weight comes in at 83.8 kg, so two pairs of hands beat one. The 2 m length rules out small hatchbacks even with the bench folded. Estates, large SUVs, and vans take it without drama. For anything in between, plan the diagonal route through the cabin and check the path past the parcel shelf clips. Load the long pack first, then the two shorter boxes on top.
On pickup day
With seats up in your Tesla Model Y, the BRIMNES day-bed will not fit. The largest package is 206 cm long and the boot opening is 101 cm wide, leaving you 43.7 cm short on a diagonal. Fold the rear bench and the geometry shifts: 194 cm of floor and 95 cm of width, with just 0.2 cm of margin against cargo width. That is razor close. Pull the parcel shelf out, line the long edge along the boot wall, and bring straps. Verify with a tape on pickup day, the numbers were last checked recently.
Frequently asked questions
Find quick answers about fit for BRIMNES Day-bed frame with 2 drawers, white, 80x200 cm in Tesla Model Y 2023, including seats up vs seats down, limiting factor, best orientation, and package-by-package margins.
Will BRIMNES Day-bed frame with 2 drawers, white, 80x200 cm fit in Tesla Model Y 2023?
Maybe. With seats down, this is a borderline fit at Cargo width (+0.2 cm). Best orientation: diagonal.
What is the tightest part?
The limiting factor is Cargo width, with +0.2 cm margin in seats down.
What can I try to make it work?
Use diagonal loading and focus on cargo width. Center the package between the side walls before final rotation. Load diagonally first, then straighten once inside.
Can I load it diagonally?
Yes, diagonal is the best orientation for this check, with +0.2 cm around the limiting point.
What could change the result in real life?
Cargo liners, wheel-arch bumps, the trunk cover, and items already in the trunk can reduce usable space. Measure the tightest point if the fit is close.
Does it fit with seats up or seats down?
Seats up: No (-43.7 cm). Seats down: Maybe (+0.2 cm). Default selection follows YES > MAYBE > NO.
Which package is the hardest to load?
Package #1 (206x59x7 cm) is the tightest, with +0.2 cm at Cargo width.
Do I need to fold the seats?
Results differ by configuration. Seats up is No and seats down is Maybe.
Do all packages fit in the car at the same time?
We test each package individually. All packages fitting individually does not guarantee they will fit stacked together. You may need multiple trips.
Which loading orientation works best?
Diagonal is the best orientation for this result in seats down.