LAGKAPTEN / ADILS Desk, white, 55 1/8x23 5/8 "
+14⅝″ margin
Will fit in a ?
Yes, it will fit!
Good news: DÄNKA Ironing board, 47 ¼x14 ½ " should fit in a straight orientation in a VW Passat Variant 2024 with seats down.
Fit Details
With seats down, Good news - this package should fit. You have about +18″ of clearance at cargo length when loading straight. We're about 95% confident in this estimate.
DÄNKA Ironing board, 47 ¼x14 ½ "
Box: 60″ × 15½″ × 2¼″ · 12 lb 8 oz
Based on IKEA US (United States).
Package dimensions last checked and updated on Aug 24, 2026
Package
Status
Limiting factor
Best orientation
Package #1
60″ × 15½″ × 2¼″
Status:+18″ margin
Limited by
Limiting factor:Cargo length
Best orientation:Straight
Vehicle limits
Opening width / height
41⅜″ / 31⅛″
Cargo width / height
39¾″ / 34⅝″
Cargo length seats up / down
44½″ / 79⅛″
Loading sill height
25¼″
VW Passat Variant 2024
Measurements last checked and updated on Jul 25, 2026
Helpful tips
Use these loading tips to improve your chances of fitting DÄNKA Ironing board, 47 ¼x14 ½ " in VW Passat Variant 2024.
Use available cargo length
Push the package fully toward the seat backs to use all cargo length.
Keep a straight loading path
Keep the package straight and level while loading.
Other items to check in VW Passat Variant 2024
Ranked by fit margin and package-dimension similarity. This improves as we index more items.
About the VW Passat Variant 2024 boot
The Passat Variant is an estate, and its boot behaves like one. The opening is 41 3/8 inches wide by 31 1/8 inches tall, and the floor runs 44 1/2 inches with the seats up. Fold the rear bench and it stretches to 79 1/8 inches, a gain of 34 5/8 inches, which is where this car earns its keep. That long flat floor takes flat-pack boxes and long, low loads with ease, though the narrowest point is 39 3/4 inches, so very wide items still need care. The sill sits at 25 1/4 inches with a 3 1/2 inch drop, so slide heavy boxes rather than lift them.
About the DÄNKA Ironing board, 47 ¼x14 ½ " package
One box, 60″ × 15½″ × 2¼″, at 12 lb 8 oz: the DÄNKA is light enough to carry one-handed and long enough to be awkward anyway. Weight is not the problem; length is. A 60″ slab will not sit crosswise in a normal trunk, so it rides diagonally or waits for a folded seat. Nearly any hatchback takes it with the bench down, a wagon or SUV swallows it flat, and it can angle across the rear seat of a sedan in a pinch. Feed it nose first through the opening and keep it supported along its length; a carton only 2¼″ thick flexes if you bridge it, and the corners dent before anything else.
Frequently asked questions
Find quick answers about fit for DÄNKA Ironing board, 47 ¼x14 ½ " in VW Passat Variant 2024, including seats up vs seats down, limiting factor, best orientation, and package-by-package margins.
Will DÄNKA Ironing board, 47 ¼x14 ½ " fit in VW Passat Variant 2024?
Yes. With seats down, it fits with +18″ at Cargo length. Best orientation: straight.
What is the tightest part?
The limiting factor is Cargo length, with +18″ margin in seats down.
Which loading orientation works best?
Straight is the best orientation for this result in seats down.
How confident is this result?
Confidence is 95 out of 100 based on available dimensions and margin tightness.
Does it fit with seats up or seats down?
Seats up: No (-1¼″). Seats down: Yes (+18″). Default selection follows YES > MAYBE > NO.
Do I need to fold the seats?
Results differ by configuration. Seats up is No and seats down is Yes.
How tight is this fit?
This result is in the comfortable clearance band (+18″ at Cargo length).