All items that fit a Toyota C-HR 2020

Will fit in a ?

Yes, it will fit!

Good news: DÄNKA Ironing board, 47 ¼x14 ½″ should fit diagonally in a Toyota C-HR 2020 with seats down.

Toyota C-HR 2020

Fit Details

With seats down, Good news - this package should fit, with 5⅜″ to spare at cargo length when loading diagonal. We're about 95% confident in this estimate.

DÄNKA Ironing board, 47 ¼x14 ½″

DÄNKA Ironing board, 47 ¼x14 ½″

Box: 60″ × 15½″ × 2¼″ · 12 lb 8 oz

Based on IKEA US (United States).

Package dimensions last checked and updated on Oct 21, 2026

Link to the source

  • Package #1

    60″ × 15½″ × 2¼″

    Status:+5⅜″ to spare

    Limiting factor:Cargo length

    Best orientation:Diagonal

Vehicle limits

Trunk limits for Toyota C-HR 2020

Opening width / height above sill

27½″ / 24¾″

Cargo width / height

37¾″ / 26⅜″

Cargo length seats up / down

30⅜″ / 62⅝″

Loading sill height

30⅜″

Toyota C-HR 2020

Measurements last checked and updated on Oct 21, 2026

Helpful tips

Use these loading tips to improve your chances of fitting DÄNKA Ironing board, 47 ¼x14 ½″ in Toyota C-HR 2020.

  • Use available cargo length

    Push the package fully toward the seat backs to use all cargo length.

  • Load diagonally first

    Load diagonally first, then straighten once inside.

Other items to check in Toyota C-HR 2020

Ranked by fit margin and package-dimension similarity. This improves as we index more items.

About the Toyota C-HR 2020 boot

The C-HR's opening is narrower than its boot. It is 27½″ wide with 24¾″ of clear height above the loading sill, while the floor behind it stays 37¾″ wide at its narrowest. That sill sits 30⅜″ off the ground, and the floor is only 1⅝″ lower. Seats up, you get 30⅜″ of floor. Folding the rear seats adds 32¼″, a big gain, for 62⅝″ in total, though a box that passes the opening can still be too long for that floor. Bulky boxes are the poor match. Check every box against the opening before you think about the floor.

About the DÄNKA Ironing board, 47 ¼x14 ½″ package

Boxed, the DÄNKA ironing board measures 60″ × 15½″ × 2¼″ and weighs 12 lb 8 oz. The weight is no trouble. The shape takes more thought, because the box is long and thin. Lying straight, it fills 60″ of boot floor from end to end. Held by one end, a box like this wobbles, and the far end is the part that knocks into things. Hold it at its middle instead, where it balances, and you can carry it to the car on your own.

Frequently asked questions

Find quick answers about fit for DÄNKA Ironing board, 47 ¼x14 ½″ in Toyota C-HR 2020, including seats up vs seats down, limiting factor, best orientation, and package-by-package margins.

Will DÄNKA Ironing board, 47 ¼x14 ½″ fit in Toyota C-HR 2020?

Yes. With seats down, it fits with 5⅜″ to spare at Cargo length. Best orientation: diagonal.

What is the tightest part?

The limiting factor is Cargo length, with +5⅜″ margin in seats down.

Do I need to fold the seats?

Results differ by configuration. Seats up is No and seats down is Yes.

Which loading orientation works best?

Diagonal is the best orientation for this result in seats down.

How confident is this result?

Confidence is 95 out of 100 based on available dimensions and margin tightness.

Does it fit with seats up or seats down?

Seats up: No (-15″). Seats down: Yes (+5⅜″). Default selection follows YES > MAYBE > NO.

What do YES, MAYBE and NO mean here?

YES means there is at least 2⅜″ to spare at the tightest point, in the best way the box can go in. MAYBE means it fits on paper, but with less than 2⅜″ to spare, so trim, the parcel shelf or the loading angle can decide it. NO means the box is bigger than the space at its tightest point, whichever way it goes in. Every margin on this page is that real gap: the car's measurement minus the box's.

Can I load it diagonally?

Yes, diagonal is the best orientation for this check, with +5⅜″ around the limiting point.

How tight is this fit?

This result is in the good clearance band (+5⅜″ at Cargo length).