LAGKAPTEN / ADILS Desk, white, 55 1/8x23 5/8 "
+3⅞″ margin
Will fit in a ?
Maybe, it's a tight fit.
It might fit, but it's tight: DÄNKA Ironing board, 47 ¼x14 ½ " is borderline diagonally in a Renault Clio 2024 with seats down.
Fit Details
With seats down, It's close. This package is a borderline fit at opening width (+¾″), best loaded diagonal. See the Helpful tips section below for practical loading suggestions. We're about 75% confident in this estimate.
DÄNKA Ironing board, 47 ¼x14 ½ "
Box: 60″ × 15½″ × 2¼″ · 12 lb 8 oz
Based on IKEA US (United States).
Package dimensions last checked and updated on Aug 24, 2026
Package
Status
Limiting factor
Best orientation
Package #1
60″ × 15½″ × 2¼″
Status:+¾″ tight
Limited by
Limiting factor:Opening width
Best orientation:Diagonal
Vehicle limits
Opening width / height
39⅜″ / 29⅛″
Cargo width / height
39¾″ / 38⅝″
Cargo length seats up / down
28″ / 52″
Loading sill height
30⅜″
Renault Clio 2024
Measurements last checked and updated on Jun 20, 2026
Helpful tips
Use these loading tips to improve your chances of fitting DÄNKA Ironing board, 47 ¼x14 ½ " in Renault Clio 2024.
Optimize opening width
Keep the narrow edge leading while entering the opening.
Load diagonally first
Load diagonally first, then straighten once inside.
Clear real-world obstacles
Clear the trunk before loading. Existing cargo, trunk cover, and wheel-arch bumps can reduce usable space.
Alternatives that fit in Renault Clio 2024
Ranked by fit margin and package-dimension similarity. This improves as we index more items.
About the Renault Clio 2024 boot
The Renault Clio 2024 gives you a supermini boot that is wider than it is deep. The opening measures 39⅜″ wide by 29⅛″ tall, and behind it the floor runs 28″ with the seats up. Fold the rear bench and that floor stretches to 52″, a gain of 24″, which is where the Clio earns its keep. The narrowest point across the floor is 39¾″. It takes shopping, cases and folded flat-packs well, but long rigid boxes fight the short upright floor. The load sill sits 30⅜″ up with a 9½″ drop, so lift over the lip, then slide forward.
About the DÄNKA Ironing board, 47 ¼x14 ½ " package
One box, 60″ × 15½″ × 2¼″, at 12 lb 8 oz: the DÄNKA is light enough to carry one-handed and long enough to be awkward anyway. Weight is not the problem; length is. A 60″ slab will not sit crosswise in a normal trunk, so it rides diagonally or waits for a folded seat. Nearly any hatchback takes it with the bench down, a wagon or SUV swallows it flat, and it can angle across the rear seat of a sedan in a pinch. Feed it nose first through the opening and keep it supported along its length; a carton only 2¼″ thick flexes if you bridge it, and the corners dent before anything else.
Frequently asked questions
Find quick answers about fit for DÄNKA Ironing board, 47 ¼x14 ½ " in Renault Clio 2024, including seats up vs seats down, limiting factor, best orientation, and package-by-package margins.
Will DÄNKA Ironing board, 47 ¼x14 ½ " fit in Renault Clio 2024?
Maybe. With seats down, this is a borderline fit at Opening width (+¾″). Best orientation: diagonal.
What is the tightest part?
The limiting factor is Opening width, with +¾″ margin in seats down.
Do I need to fold the seats?
Results differ by configuration. Seats up is No and seats down is Maybe.
Is the trunk opening the issue?
Yes. The tightest constraint is at the opening (Opening width) with +¾″ margin.
Which loading orientation works best?
Diagonal is the best orientation for this result in seats down.
Does it fit with seats up or seats down?
Seats up: No (-11⅜″). Seats down: Maybe (+¾″). Default selection follows YES > MAYBE > NO.
What can I try to make it work?
Use diagonal loading and focus on opening width. Keep the narrow edge leading while entering the opening. Load diagonally first, then straighten once inside.
Can I load it diagonally?
Yes, diagonal is the best orientation for this check, with +¾″ around the limiting point.
What could change the result in real life?
Cargo liners, wheel-arch bumps, the trunk cover, and items already in the trunk can reduce usable space. Measure the tightest point if the fit is close.
How tight is this fit?
This result is in the borderline band (+¾″ at Opening width).