BISSA Shoe cabinet with 3 compartments, white, 19 1/4x11x53 1/8″
+19¾″ margin
All items that fit a Peugeot 5008 2021
Will fit in a ?
Yes, it will fit!
Good news: DÄNKA Ironing board, 47 ¼x14 ½″ should fit diagonally in a Peugeot 5008 2021 with seats down.
Fit Details
With seats down, Good news - this package should fit, with 15⅝″ to spare at opening height when loading diagonal. We're about 95% confident in this estimate.
DÄNKA Ironing board, 47 ¼x14 ½″
Box: 60″ × 15½″ × 2¼″ · 12 lb 8 oz
Based on IKEA US (United States).
Package dimensions last checked and updated on Oct 21, 2026
Package
Status
Limiting factor
Best orientation
Package #1
60″ × 15½″ × 2¼″
Status:+15⅝″ to spare
Limited by
Limiting factor:Opening height
Best orientation:Diagonal
Vehicle limits
Opening width / height above sill
44½″ / 31⅛″
Cargo width / height
45¼″ / 31½″
Cargo length seats up (third row folded) / down
41⅜″ / 74″
Loading sill height
27⅛″
Peugeot 5008 2021
Measurements last checked and updated on Oct 21, 2026
Helpful tips
Use these loading tips to improve your chances of fitting DÄNKA Ironing board, 47 ¼x14 ½″ in Peugeot 5008 2021.
Manage opening height
Keep the highest edge low at the trunk opening.
Load diagonally first
Load diagonally first, then straighten once inside.
Other items to check in Peugeot 5008 2021
Ranked by fit margin and package-dimension similarity. This improves as we index more items.
About the Peugeot 5008 2021 boot
Fold the second row of the 5008, with the third row already down, and the boot floor runs to 74″. That length is for a pack laid straight: some longer packs fit at an angle, on their side. In 5-seat mode, with only the third row folded, you have 41⅜″ of floor, and with all seven seats up just 13⅜″. Above the loading sill, the opening gives you 44½″ of width and 31⅛″ of height. The floor is 45¼″ across at its narrowest, a little wider than the opening, with room for boxes side by side. Put the longest pack in first, then fill the space around it.
About the DÄNKA Ironing board, 47 ¼x14 ½″ package
Boxed, the DÄNKA ironing board measures 60″ × 15½″ × 2¼″ and weighs 12 lb 8 oz. The weight is no trouble. The shape takes more thought, because the box is long and thin. Lying straight, it fills 60″ of boot floor from end to end. Held by one end, a box like this wobbles, and the far end is the part that knocks into things. Hold it at its middle instead, where it balances, and you can carry it to the car on your own.
Frequently asked questions
Find quick answers about fit for DÄNKA Ironing board, 47 ¼x14 ½″ in Peugeot 5008 2021, including seats up vs seats down, limiting factor, best orientation, and package-by-package margins.
Will DÄNKA Ironing board, 47 ¼x14 ½″ fit in Peugeot 5008 2021?
Yes. With seats down, it fits with 15⅝″ to spare at Opening height. Best orientation: diagonal.
What is the tightest part?
The limiting factor is Opening height, with +15⅝″ margin in seats down.
Do I need to fold the seats?
Results differ by configuration. Seats up is No and seats down is Yes.
Is the trunk opening the issue?
Yes. The tightest constraint is at the opening (Opening height) with +15⅝″ margin.
How tight is this fit?
This result is in the comfortable clearance band (+15⅝″ at Opening height).
Does it fit with seats up or seats down?
Seats up: No (-1⅛″). Seats down: Yes (+15⅝″). Default selection follows YES > MAYBE > NO.
What do YES, MAYBE and NO mean here?
YES means there is at least 2⅜″ to spare at the tightest point, in the best way the box can go in. MAYBE means it fits on paper, but with less than 2⅜″ to spare, so trim, the parcel shelf or the loading angle can decide it. NO means the box is bigger than the space at its tightest point, whichever way it goes in. Every margin on this page is that real gap: the car's measurement minus the box's.
Can I load it diagonally?
Yes, diagonal is the best orientation for this check, with +15⅝″ around the limiting point.
Which loading orientation works best?
Diagonal is the best orientation for this result in seats down.
How confident is this result?
Confidence is 95 out of 100 based on available dimensions and margin tightness.