All items that fit a Peugeot 2008 2020

Will fit in a ?

Yes, it will fit!

Good news: DÄNKA Ironing board, 47 ¼x14 ½″ should fit diagonally in a Peugeot 2008 2020 with seats down.

Peugeot 2008 2020

Fit Details

With seats down, Good news - this package should fit, with 7¼″ to spare at cargo length when loading diagonal. We're about 95% confident in this estimate.

DÄNKA Ironing board, 47 ¼x14 ½″

DÄNKA Ironing board, 47 ¼x14 ½″

Box: 60″ × 15½″ × 2¼″ · 12 lb 8 oz

Based on IKEA US (United States).

Package dimensions last checked and updated on Oct 21, 2026

Link to the source

  • Package #1

    60″ × 15½″ × 2¼″

    Status:+7¼″ to spare

    Limiting factor:Cargo length

    Best orientation:Diagonal

Vehicle limits

Trunk limits for Peugeot 2008 2020

Opening width / height above sill

40⅛″ / 26¾″

Cargo width / height

37¾″ / 30¾″

Cargo length seats up / down

30¾″ / 61″

Loading sill height

28″

Peugeot 2008 2020

Measurements last checked and updated on Oct 21, 2026

Helpful tips

Use these loading tips to improve your chances of fitting DÄNKA Ironing board, 47 ¼x14 ½″ in Peugeot 2008 2020.

  • Use available cargo length

    Push the package fully toward the seat backs to use all cargo length.

  • Load diagonally first

    Load diagonally first, then straighten once inside.

Other items to check in Peugeot 2008 2020

Ranked by fit margin and package-dimension similarity. This improves as we index more items.

About the Peugeot 2008 2020 boot

Two figures matter most in the Peugeot 2008's boot. The first is the floor width: 37¾″ at its narrowest, less than the 40⅛″ tailgate opening, so the floor is the width to measure against. The second is the floor length with the rear seats folded: 61″, against 30¾″ with them up. That is the set-up for long flat packs. The opening gives you 26¾″ of clear height above the loading sill, which sits at 28″, and the floor is only 3⅞″ below the sill. Those floor lengths are for a box laid straight: at an angle across the floor, a longer box can still fit.

About the DÄNKA Ironing board, 47 ¼x14 ½″ package

Boxed, the DÄNKA ironing board measures 60″ × 15½″ × 2¼″ and weighs 12 lb 8 oz. The weight is no trouble. The shape takes more thought, because the box is long and thin. Lying straight, it fills 60″ of boot floor from end to end. Held by one end, a box like this wobbles, and the far end is the part that knocks into things. Hold it at its middle instead, where it balances, and you can carry it to the car on your own.

Frequently asked questions

Find quick answers about fit for DÄNKA Ironing board, 47 ¼x14 ½″ in Peugeot 2008 2020, including seats up vs seats down, limiting factor, best orientation, and package-by-package margins.

Will DÄNKA Ironing board, 47 ¼x14 ½″ fit in Peugeot 2008 2020?

Yes. With seats down, it fits with 7¼″ to spare at Cargo length. Best orientation: diagonal.

What is the tightest part?

The limiting factor is Cargo length, with +7¼″ margin in seats down.

Do I need to fold the seats?

Results differ by configuration. Seats up is No and seats down is Yes.

Which loading orientation works best?

Diagonal is the best orientation for this result in seats down.

How confident is this result?

Confidence is 95 out of 100 based on available dimensions and margin tightness.

Does it fit with seats up or seats down?

Seats up: No (-9⅝″). Seats down: Yes (+7¼″). Default selection follows YES > MAYBE > NO.

What do YES, MAYBE and NO mean here?

YES means there is at least 2⅜″ to spare at the tightest point, in the best way the box can go in. MAYBE means it fits on paper, but with less than 2⅜″ to spare, so trim, the parcel shelf or the loading angle can decide it. NO means the box is bigger than the space at its tightest point, whichever way it goes in. Every margin on this page is that real gap: the car's measurement minus the box's.

Can I load it diagonally?

Yes, diagonal is the best orientation for this check, with +7¼″ around the limiting point.

How tight is this fit?

This result is in the comfortable clearance band (+7¼″ at Cargo length).