All items that fit an Opel Corsa 2024

Will fit in an ?

No, it won't fit.

It will not fit in this setup: DÄNKA Ironing board, 47 ¼x14 ½″ is too large for an Opel Corsa 2024 with seats up.

Opel Corsa 2024

Fit Details

With seats up, This package will not fit in this setup. The blocker is cargo length, and you're short by 13⅞″ even with diagonal loading. We're about 95% confident in this estimate.

DÄNKA Ironing board, 47 ¼x14 ½″

DÄNKA Ironing board, 47 ¼x14 ½″

Box: 60″ × 15½″ × 2¼″ · 12 lb 8 oz

Based on IKEA US (United States).

Package dimensions last checked and updated on Oct 21, 2026

  • Package #1

    60″ × 15½″ × 2¼″

    Status:13⅞″ short

    Limiting factor:Cargo length

    Best orientation:Diagonal

Vehicle limits

Trunk limits for Opel Corsa 2024

Opening width / height above sill

33⅞″ / 21⅝″

Cargo width / height

37¾″ / 28¾″

Cargo length seats up / down

26″ / 52″

Loading sill height

27½″

Opel Corsa 2024

Measurements last checked and updated on Oct 21, 2026

Helpful tips

Use these loading tips to improve your chances of fitting DÄNKA Ironing board, 47 ¼x14 ½″ in Opel Corsa 2024.

  • Use available cargo length

    Use seats down if available to gain cargo length.

  • Load diagonally first

    Load diagonally first, then straighten once inside.

  • Try fitting alternatives

    Check the Similar items that fit section for safer alternatives.

About the Opel Corsa 2024 boot

With the rear seats up, the Corsa's boot floor is wider than it is long: 26″ long and 37¾″ wide at its narrowest. The opening is 33⅞″ wide, with 21⅝″ of clear height above the loading sill, while the boot is 28¾″ tall from its floor. That clear height is what makes tall boxes hard work here. The sill is 27½″ high, and the floor sits 7⅛″ below it. Folding the seats adds 26″, for 52″ of floor, the set-up for long flat packs. Before you fold them for a box longer than 26″, try it across the floor or at an angle, turned so it clears the 33⅞″ opening.

About the DÄNKA Ironing board, 47 ¼x14 ½″ package

Boxed, the DÄNKA ironing board measures 60″ × 15½″ × 2¼″ and weighs 12 lb 8 oz. The weight is no trouble. The shape takes more thought, because the box is long and thin. Lying straight, it fills 60″ of boot floor from end to end. Held by one end, a box like this wobbles, and the far end is the part that knocks into things. Hold it at its middle instead, where it balances, and you can carry it to the car on your own.

Frequently asked questions

Find quick answers about fit for DÄNKA Ironing board, 47 ¼x14 ½″ in Opel Corsa 2024, including seats up vs seats down, limiting factor, best orientation, and package-by-package margins.

Will DÄNKA Ironing board, 47 ¼x14 ½″ fit in Opel Corsa 2024?

No. With seats up, it is short by 13⅞″ at Cargo length, even with diagonal loading.

What is the tightest part?

The limiting factor is Cargo length, with -13⅞″ margin in seats up.

Why does it not fit?

The blocker is Cargo length: with seats up, the box is 13⅞″ bigger than the space there.

Can I load it diagonally?

Yes, diagonal is the best orientation for this check, with -13⅞″ around the limiting point.

How tight is this fit?

This result is in the clear no-fit band (-13⅞″ at Cargo length).

Does it fit with seats up or seats down?

Seats up: No (-13⅞″). Seats down: No (0″). Default selection follows YES > MAYBE > NO.

What do YES, MAYBE and NO mean here?

YES means there is at least 2⅜″ to spare at the tightest point, in the best way the box can go in. MAYBE means it fits on paper, but with less than 2⅜″ to spare, so trim, the parcel shelf or the loading angle can decide it. NO means the box is bigger than the space at its tightest point, whichever way it goes in. Every margin on this page is that real gap: the car's measurement minus the box's.

What should I do instead?

Use the Helpful tips & alternatives section to choose a smaller item, different orientation, or split-load plan.

Which loading orientation works best?

Diagonal is the best orientation for this result in seats up.

How confident is this result?

Confidence is 95 out of 100 based on available dimensions and margin tightness.