
LAGKAPTEN / ADILS Desk, white, 55 1/8x23 5/8 "
+7½″ margin
Yes, it will fit!

Fit Details

DÄNKA Ironing board, 47 ¼x14 ½ "
Box: 60″ × 15½″ × 2¼″ · 12 lb 8 oz
Based on IKEA US (United States).
Package dimensions last checked and updated on Aug 24, 2026
Package
Status
Limiting factor
Best orientation
Package #1
60″ × 15½″ × 2¼″
Status:+3¾″ margin
Limited by
Limiting factor:Opening width
Best orientation:Diagonal
Vehicle limits

Opening width / height
38¼″ / 33⅛″
Cargo width / height
40⅛″ / 41⅜″
Cargo length seats up / down
28¾″ / 59″
Loading sill height
30¾″
Nissan Juke 2024
Measurements last checked and updated on Aug 09, 2026
Helpful tips
Use these loading tips to improve your chances of fitting DÄNKA Ironing board, 47 ¼x14 ½ " in Nissan Juke 2024.
Optimize opening width
Keep the narrow edge leading while entering the opening.
Load diagonally first
Load diagonally first, then straighten once inside.
Other items to check in Nissan Juke 2024
Ranked by fit margin and package-dimension similarity. This improves as we index more items.
About the Nissan Juke 2024 boot
The Juke pairs a usable mouth with a short floor. The opening is 38¼″ wide × 33⅛″ tall, yet with the seats up the boot floor runs only 28¾″ deep, so long boxes lean or stay out. Fold the bench and the floor grows to 59″, a gain of 30⅜″. At 40⅛″ across, the floor is wider than the opening, so cartons square up once they clear the mouth. Watch the 30¾″ sill with an 8¼″ drop behind it: you lower boxes in rather than slide them. Load flat packs last so they lie on top, and bring a second pair of hands for anything heavy at that lip.
About the DÄNKA Ironing board, 47 ¼x14 ½ " package
One box, 60″ × 15½″ × 2¼″, at 12 lb 8 oz: the DÄNKA is light enough to carry one-handed and long enough to be awkward anyway. Weight is not the problem; length is. A 60″ slab will not sit crosswise in a normal trunk, so it rides diagonally or waits for a folded seat. Nearly any hatchback takes it with the bench down, a wagon or SUV swallows it flat, and it can angle across the rear seat of a sedan in a pinch. Feed it nose first through the opening and keep it supported along its length; a carton only 2¼″ thick flexes if you bridge it, and the corners dent before anything else.
Frequently asked questions
Find quick answers about fit for DÄNKA Ironing board, 47 ¼x14 ½ " in Nissan Juke 2024, including seats up vs seats down, limiting factor, best orientation, and package-by-package margins.
Will DÄNKA Ironing board, 47 ¼x14 ½ " fit in Nissan Juke 2024?
Yes. With seats down, it fits with +3¾″ at Opening width. Best orientation: diagonal.
What is the tightest part?
The limiting factor is Opening width, with +3¾″ margin in seats down.
Can I load it diagonally?
Yes, diagonal is the best orientation for this check, with +3¾″ around the limiting point.
Which loading orientation works best?
Diagonal is the best orientation for this result in seats down.
How confident is this result?
Confidence is 95 out of 100 based on available dimensions and margin tightness.
Does it fit with seats up or seats down?
Seats up: No (-12¼″). Seats down: Yes (+3¾″). Default selection follows YES > MAYBE > NO.
Do I need to fold the seats?
Results differ by configuration. Seats up is No and seats down is Yes.
Is the trunk opening the issue?
Yes. The tightest constraint is at the opening (Opening width) with +3¾″ margin.
How tight is this fit?
This result is in the good clearance band (+3¾″ at Opening width).