Will fit in a ?

Yes, it will fit!

Good news: DÄNKA Ironing board, 47 ¼x14 ½ " should fit diagonally in a Mercedes Benz A-Class 2019 with seats down.

Mercedes Benz A-Class 2019

Fit Details

With seats down, Good news - this package should fit. You have about +3⅜″ of clearance at opening width when loading diagonal. We're about 95% confident in this estimate.

DÄNKA Ironing board, 47 ¼x14 ½ "

DÄNKA Ironing board, 47 ¼x14 ½ "

Box: 60″ × 15½″ × 2¼″ · 12 lb 8 oz

Based on IKEA US (United States).

Package dimensions last checked and updated on Aug 24, 2026

  • Package #1

    60″ × 15½″ × 2¼″

    Status:+3⅜″ margin

    Limiting factor:Opening width

    Best orientation:Diagonal

Vehicle limits

Trunk limits for Mercedes Benz A-Class 2019

Opening width / height

37″ / 28¾″

Cargo width / height

39″ / 33⅛″

Cargo length seats up / down

32¼″ / 59½″

Loading sill height

25⅝″

Mercedes Benz A-Class 2019

Measurements last checked and updated on Jul 29, 2026

About the Mercedes Benz A-Class 2019 boot

The A-Class gives you a hatchback boot with a modest mouth, 37″ wide and 28¾″ tall. The floor runs 32¼″ with the seats up and nearly doubles to 59½″ folded, a 27⅛″ gain that is this boot's strongest card. It narrows to 39″ at the back, so wide flat-packs sit better on the diagonal. The load lip is fairly high at 25⅝″ with a 4⅜″ drop to the floor, so lift heavy boxes in rather than drag them. Short and medium cartons go in seats up; long bed and wardrobe frames need the fold, and the very longest need a roof rack. Fold the seats before you load.

About the DÄNKA Ironing board, 47 ¼x14 ½ " package

One box, 60″ × 15½″ × 2¼″, at 12 lb 8 oz: the DÄNKA is light enough to carry one-handed and long enough to be awkward anyway. Weight is not the problem; length is. A 60″ slab will not sit crosswise in a normal trunk, so it rides diagonally or waits for a folded seat. Nearly any hatchback takes it with the bench down, a wagon or SUV swallows it flat, and it can angle across the rear seat of a sedan in a pinch. Feed it nose first through the opening and keep it supported along its length; a carton only 2¼″ thick flexes if you bridge it, and the corners dent before anything else.

Frequently asked questions

Find quick answers about fit for DÄNKA Ironing board, 47 ¼x14 ½ " in Mercedes Benz A-Class 2019, including seats up vs seats down, limiting factor, best orientation, and package-by-package margins.

Will DÄNKA Ironing board, 47 ¼x14 ½ " fit in Mercedes Benz A-Class 2019?

Yes. With seats down, it fits with +3⅜″ at Opening width. Best orientation: diagonal.

What is the tightest part?

The limiting factor is Opening width, with +3⅜″ margin in seats down.

Can I load it diagonally?

Yes, diagonal is the best orientation for this check, with +3⅜″ around the limiting point.

Which loading orientation works best?

Diagonal is the best orientation for this result in seats down.

How confident is this result?

Confidence is 95 out of 100 based on available dimensions and margin tightness.

Does it fit with seats up or seats down?

Seats up: No (-11¼″). Seats down: Yes (+3⅜″). Default selection follows YES > MAYBE > NO.

Do I need to fold the seats?

Results differ by configuration. Seats up is No and seats down is Yes.

Is the trunk opening the issue?

Yes. The tightest constraint is at the opening (Opening width) with +3⅜″ margin.

How tight is this fit?

This result is in the good clearance band (+3⅜″ at Opening width).