NÄMMARÖ Privacy screen, light brown stained indoor/outdoor, 55 1/8x31 1/2x19 5/8″
+16⅜″ margin
All items that fit a Hyundai Tucson 2025
Will fit in a ?
Yes, it will fit!
Good news: DÄNKA Ironing board, 47 ¼x14 ½″ should fit diagonally in a Hyundai Tucson 2025 with seats down.
Fit Details
With seats down, Good news - this package should fit, with 12¾″ to spare at cargo length when loading diagonal. We're about 95% confident in this estimate.
DÄNKA Ironing board, 47 ¼x14 ½″
Box: 60″ × 15½″ × 2¼″ · 12 lb 8 oz
Based on IKEA US (United States).
Package dimensions last checked and updated on Oct 21, 2026
Package
Status
Limiting factor
Best orientation
Package #1
60″ × 15½″ × 2¼″
Status:+12¾″ to spare
Limited by
Limiting factor:Cargo length
Best orientation:Diagonal
Vehicle limits
Opening width / height above sill
40⅛″ / 28¾″
Cargo width / height
41″ / 28¾″
Cargo length seats up / down
35⅞″ / 68⅛″
Loading sill height
28¾″
Hyundai Tucson 2025
Measurements last checked and updated on Oct 21, 2026
Helpful tips
Use these loading tips to improve your chances of fitting DÄNKA Ironing board, 47 ¼x14 ½″ in Hyundai Tucson 2025.
Use available cargo length
Push the package fully toward the seat backs to use all cargo length.
Load diagonally first
Load diagonally first, then straighten once inside.
Other items to check in Hyundai Tucson 2025
Ranked by fit margin and package-dimension similarity. This improves as we index more items.
About the Hyundai Tucson 2025 boot
The Tucson's boot floor is flush with the loading sill, which sits 28¾″ off the ground. The opening is 40⅛″ wide and 28¾″ high, and the floor is 41″ wide at its narrowest, so the opening sets the width. Seats up, you get 35⅞″ of floor for a few boxes, and some longer packs still fit there at an angle, standing on their side. Fold the rear seats and you gain 32¼″, for 68⅛″ of floor, which suits long flat packs. Because there is no step down, you only lift once: get the box onto the sill, then slide it all the way in.
About the DÄNKA Ironing board, 47 ¼x14 ½″ package
Boxed, the DÄNKA ironing board measures 60″ × 15½″ × 2¼″ and weighs 12 lb 8 oz. The weight is no trouble. The shape takes more thought, because the box is long and thin. Lying straight, it fills 60″ of boot floor from end to end. Held by one end, a box like this wobbles, and the far end is the part that knocks into things. Hold it at its middle instead, where it balances, and you can carry it to the car on your own.
Frequently asked questions
Find quick answers about fit for DÄNKA Ironing board, 47 ¼x14 ½″ in Hyundai Tucson 2025, including seats up vs seats down, limiting factor, best orientation, and package-by-package margins.
Will DÄNKA Ironing board, 47 ¼x14 ½″ fit in Hyundai Tucson 2025?
Yes. With seats down, it fits with 12¾″ to spare at Cargo length. Best orientation: diagonal.
What is the tightest part?
The limiting factor is Cargo length, with +12¾″ margin in seats down.
Do I need to fold the seats?
Results differ by configuration. Seats up is No and seats down is Yes.
Which loading orientation works best?
Diagonal is the best orientation for this result in seats down.
How confident is this result?
Confidence is 95 out of 100 based on available dimensions and margin tightness.
Does it fit with seats up or seats down?
Seats up: No (-6″). Seats down: Yes (+12¾″). Default selection follows YES > MAYBE > NO.
What do YES, MAYBE and NO mean here?
YES means there is at least 2⅜″ to spare at the tightest point, in the best way the box can go in. MAYBE means it fits on paper, but with less than 2⅜″ to spare, so trim, the parcel shelf or the loading angle can decide it. NO means the box is bigger than the space at its tightest point, whichever way it goes in. Every margin on this page is that real gap: the car's measurement minus the box's.
Can I load it diagonally?
Yes, diagonal is the best orientation for this check, with +12¾″ around the limiting point.
How tight is this fit?
This result is in the comfortable clearance band (+12¾″ at Cargo length).