Will fit in a ?

Yes, it will fit!

Good news: DÄNKA Ironing board, 47 ¼x14 ½ " should fit diagonally in a Hyundai Kona 2024 with seats down.

Hyundai Kona 2024

Fit Details

With seats down, Good news - this package should fit. You have about +9⅞″ of clearance at cargo length when loading diagonal. We're about 95% confident in this estimate.

DÄNKA Ironing board, 47 ¼x14 ½ "

DÄNKA Ironing board, 47 ¼x14 ½ "

Box: 60″ × 15½″ × 2¼″ · 12 lb 8 oz

Based on IKEA US (United States).

Package dimensions last checked and updated on Aug 24, 2026

  • Package #1

    60″ × 15½″ × 2¼″

    Status:+9⅞″ margin

    Limiting factor:Cargo length

    Best orientation:Diagonal

Vehicle limits

Trunk limits for Hyundai Kona 2024

Opening width / height

41″ / 30¾″

Cargo width / height

41″ / 32⅝″

Cargo length seats up / down

33⅞″ / 65⅜″

Loading sill height

26¾″

Hyundai Kona 2024

Measurements last checked and updated on Aug 03, 2026

About the Hyundai Kona 2024 boot

The Hyundai Kona 2024 gives you a compact but usable hatchback boot. The opening is 41″ wide by 30¾″ tall, and the floor runs 33⅞″ deep with the seats up. Its strong point is folding: drop the rear bench and the floor almost doubles to 65⅜″, a gain of 31½″. The floor stays a full 41″ wide right to the back, so flat boxes lie square. The sill sits 26¾″ off the ground with only a 2″ drop inside, so sliding heavy boxes in is easy. Long frames beyond 65⅜″ will not go, but most flat-pack cartons will. Load the longest box first, flat on the floor.

About the DÄNKA Ironing board, 47 ¼x14 ½ " package

One box, 60″ × 15½″ × 2¼″, at 12 lb 8 oz: the DÄNKA is light enough to carry one-handed and long enough to be awkward anyway. Weight is not the problem; length is. A 60″ slab will not sit crosswise in a normal trunk, so it rides diagonally or waits for a folded seat. Nearly any hatchback takes it with the bench down, a wagon or SUV swallows it flat, and it can angle across the rear seat of a sedan in a pinch. Feed it nose first through the opening and keep it supported along its length; a carton only 2¼″ thick flexes if you bridge it, and the corners dent before anything else.

Frequently asked questions

Find quick answers about fit for DÄNKA Ironing board, 47 ¼x14 ½ " in Hyundai Kona 2024, including seats up vs seats down, limiting factor, best orientation, and package-by-package margins.

Will DÄNKA Ironing board, 47 ¼x14 ½ " fit in Hyundai Kona 2024?

Yes. With seats down, it fits with +9⅞″ at Cargo length. Best orientation: diagonal.

What is the tightest part?

The limiting factor is Cargo length, with +9⅞″ margin in seats down.

Can I load it diagonally?

Yes, diagonal is the best orientation for this check, with +9⅞″ around the limiting point.

How tight is this fit?

This result is in the comfortable clearance band (+9⅞″ at Cargo length).

Does it fit with seats up or seats down?

Seats up: No (-7⅝″). Seats down: Yes (+9⅞″). Default selection follows YES > MAYBE > NO.

Do I need to fold the seats?

Results differ by configuration. Seats up is No and seats down is Yes.

Which loading orientation works best?

Diagonal is the best orientation for this result in seats down.

How confident is this result?

Confidence is 95 out of 100 based on available dimensions and margin tightness.