Will fit in a ?

Yes, it will fit!

Good news: DÄNKA Ironing board, 47 ¼x14 ½ " should fit diagonally in a Cupra Formentor VZ 2023 with seats down.

Cupra Formentor VZ 2023

Fit Details

With seats down, Good news - this package should fit. You have about +7¼″ of clearance at opening width when loading diagonal. We're about 95% confident in this estimate.

DÄNKA Ironing board, 47 ¼x14 ½ "

DÄNKA Ironing board, 47 ¼x14 ½ "

Box: 60″ × 15½″ × 2¼″ · 12 lb 8 oz

Based on IKEA US (United States).

Package dimensions last checked and updated on Aug 24, 2026

  • Package #1

    60″ × 15½″ × 2¼″

    Status:+7¼″ margin

    Limiting factor:Opening width

    Best orientation:Diagonal

Vehicle limits

Trunk limits for Cupra Formentor VZ 2023

Opening width / height

39″ / 27½″

Cargo width / height

39⅜″ / 31⅞″

Cargo length seats up / down

31⅞″ / 62⅝″

Sill to floor drop

4⅜″

Cupra Formentor VZ 2023

Measurements last checked and updated on Jul 26, 2026

About the Cupra Formentor VZ 2023 boot

The Cupra Formentor VZ gives you a compact performance SUV boot: an opening 39″ wide × 27½″ tall, a floor 31⅞″ long with the seats up, and 39⅜″ across at its narrow point. Fold the rear bench and the floor grows to 62⅝″, a gain of 30¾″, so the car nearly doubles its length once the seats drop. The tight point is that 39″ opening. Wide or long loads have to go in on a diagonal, and tall boxes are capped by the 27½″ height. It takes medium cartons and folded flat-packs well, but not full-length wardrobe frames. Fold the seats first, feed long boxes corner in, and mind the 4⅜″ lip.

About the DÄNKA Ironing board, 47 ¼x14 ½ " package

One box, 60″ × 15½″ × 2¼″, at 12 lb 8 oz: the DÄNKA is light enough to carry one-handed and long enough to be awkward anyway. Weight is not the problem; length is. A 60″ slab will not sit crosswise in a normal trunk, so it rides diagonally or waits for a folded seat. Nearly any hatchback takes it with the bench down, a wagon or SUV swallows it flat, and it can angle across the rear seat of a sedan in a pinch. Feed it nose first through the opening and keep it supported along its length; a carton only 2¼″ thick flexes if you bridge it, and the corners dent before anything else.

Frequently asked questions

Find quick answers about fit for DÄNKA Ironing board, 47 ¼x14 ½ " in Cupra Formentor VZ 2023, including seats up vs seats down, limiting factor, best orientation, and package-by-package margins.

Will DÄNKA Ironing board, 47 ¼x14 ½ " fit in Cupra Formentor VZ 2023?

Yes. With seats down, it fits with +7¼″ at Opening width. Best orientation: diagonal.

What is the tightest part?

The limiting factor is Opening width, with +7¼″ margin in seats down.

Can I load it diagonally?

Yes, diagonal is the best orientation for this check, with +7¼″ around the limiting point.

Which loading orientation works best?

Diagonal is the best orientation for this result in seats down.

How confident is this result?

Confidence is 95 out of 100 based on available dimensions and margin tightness.

Does it fit with seats up or seats down?

Seats up: No (-9⅞″). Seats down: Yes (+7¼″). Default selection follows YES > MAYBE > NO.

Do I need to fold the seats?

Results differ by configuration. Seats up is No and seats down is Yes.

Is the trunk opening the issue?

Yes. The tightest constraint is at the opening (Opening width) with +7¼″ margin.

How tight is this fit?

This result is in the comfortable clearance band (+7¼″ at Opening width).