Will fit in a ?

Yes, it will fit!

Good news: DÄNKA Ironing board, 47 ¼x14 ½ " should fit diagonally in a Citroen C3 Aircross 2019 with seats down.

Citroen C3 Aircross 2019

Fit Details

With seats down, Good news - this package should fit. You have about +2¾″ of clearance at cargo length when loading diagonal. We're about 95% confident in this estimate.

DÄNKA Ironing board, 47 ¼x14 ½ "

DÄNKA Ironing board, 47 ¼x14 ½ "

Box: 60″ × 15½″ × 2¼″ · 12 lb 8 oz

Based on IKEA US (United States).

Package dimensions last checked and updated on Aug 24, 2026

  • Package #1

    60″ × 15½″ × 2¼″

    Status:+2¾″ margin

    Limiting factor:Cargo length

    Best orientation:Diagonal

Vehicle limits

Trunk limits for Citroen C3 Aircross 2019

Opening width / height

39⅜″ / 34¼″

Cargo width / height

37⅜″ / 38⅝″

Cargo length seats up / down

28¾″ / 56¼″

Loading sill height

27½″

Citroen C3 Aircross 2019

Measurements last checked and updated on Aug 29, 2026

About the Citroen C3 Aircross 2019 boot

The C3 Aircross trunk is short on floor and generous on height. The mouth measures 39⅜″ wide by 34¼″ tall, taller than most small SUVs offer, while the seats-up floor is only 28¾″ deep. Fold the bench and the floor grows to 56¼″, a gain of 27½″ that turns a grocery trunk into a usable flat-pack space. Width between the arches is 37⅜″, and the sill sits 27½″ up with a 4⅜″ drop inside. Tall boxes ride upright here better than in rival crossovers; long boxes need the seats down every time. Slide heavy loads over the sill instead of lifting them clear.

About the DÄNKA Ironing board, 47 ¼x14 ½ " package

One box, 60″ × 15½″ × 2¼″, at 12 lb 8 oz: the DÄNKA is light enough to carry one-handed and long enough to be awkward anyway. Weight is not the problem; length is. A 60″ slab will not sit crosswise in a normal trunk, so it rides diagonally or waits for a folded seat. Nearly any hatchback takes it with the bench down, a wagon or SUV swallows it flat, and it can angle across the rear seat of a sedan in a pinch. Feed it nose first through the opening and keep it supported along its length; a carton only 2¼″ thick flexes if you bridge it, and the corners dent before anything else.

Frequently asked questions

Find quick answers about fit for DÄNKA Ironing board, 47 ¼x14 ½ " in Citroen C3 Aircross 2019, including seats up vs seats down, limiting factor, best orientation, and package-by-package margins.

Will DÄNKA Ironing board, 47 ¼x14 ½ " fit in Citroen C3 Aircross 2019?

Yes. With seats down, it fits with +2¾″ at Cargo length. Best orientation: diagonal.

What is the tightest part?

The limiting factor is Cargo length, with +2¾″ margin in seats down.

Can I load it diagonally?

Yes, diagonal is the best orientation for this check, with +2¾″ around the limiting point.

How tight is this fit?

This result is in the tight positive clearance band (+2¾″ at Cargo length).

Does it fit with seats up or seats down?

Seats up: No (-9⅞″). Seats down: Yes (+2¾″). Default selection follows YES > MAYBE > NO.

Do I need to fold the seats?

Results differ by configuration. Seats up is No and seats down is Yes.

Which loading orientation works best?

Diagonal is the best orientation for this result in seats down.

How confident is this result?

Confidence is 95 out of 100 based on available dimensions and margin tightness.