Will DÄNKA Ironing board, 47 ¼x14 ½ " fit in a BMW 1 Series 2020?

The 1 Series boot is short and low rather than deep. With the seats up the floor gives you 29½″, which is the constraint on most flat-pack runs, and the opening measures 37⅜″ wide by 26″ tall. Fold the rear bench and the floor almost doubles to 57½″, a gain of 28″. The floor is 40⅛″ across at its narrowest, so width is rarely your problem. The sill sits at 27½″ with a 3⅛″ drop, which makes this one of the easier hatchbacks to load. Fold the seats first, load long, then fill the gaps.

One box, 60″ × 15½″ × 2¼″, at 12 lb 8 oz: the DÄNKA is light enough to carry one-handed and long enough to be awkward anyway. Weight is not the problem; length is. A 60″ slab will not sit crosswise in a normal trunk, so it rides diagonally or waits for a folded seat. Nearly any hatchback takes it with the bench down, a wagon or SUV swallows it flat, and it can angle across the rear seat of a sedan in a pinch. Feed it nose first through the opening and keep it supported along its length; a carton only 2¼″ thick flexes if you bridge it, and the corners dent before anything else.