Will fit in an ?

Yes, it will fit!

Good news: DÄNKA Ironing board, 47 ¼x14 ½ " should fit diagonally in an Audi Q3 2019 with seats down.

Audi Q3 2019

Fit Details

With seats down, Good news - this package should fit. You have about +9⅜″ of clearance at cargo width when loading diagonal. We're about 95% confident in this estimate.

DÄNKA Ironing board, 47 ¼x14 ½ "

DÄNKA Ironing board, 47 ¼x14 ½ "

Box: 60″ × 15½″ × 2¼″ · 12 lb 8 oz

Based on IKEA US (United States).

Package dimensions last checked and updated on Aug 24, 2026

  • Package #1

    60″ × 15½″ × 2¼″

    Status:+9⅜″ margin

    Limiting factor:Cargo width

    Best orientation:Diagonal

Vehicle limits

Trunk limits for Audi Q3 2019

Opening width / height

44⅛″ / 30¾″

Cargo width / height

39⅜″ / 34¼″

Cargo length seats up / down

35⅜″ / 65⅜″

Loading sill height

29½″

Audi Q3 2019

Measurements last checked and updated on Jul 31, 2026

About the Audi Q3 2019 boot

The Audi Q3 gives you a wide, square boot mouth: 44⅛″ across and 30¾″ tall, so most flat-pack cartons clear the opening with the seats up. Behind them the floor runs 35⅜″, and folding the rear bench stretches that to 65⅜″, a gain of 29⅞″ that turns a school-run boot into a proper load bay. The floor holds 39⅜″ across at its narrowest, so wide boxes sit flat. The catch is the lip: at 29½″ the sill is a high lift, with a 3½″ drop to the floor. Slide heavy boxes in on their edge rather than lowering them straight down.

About the DÄNKA Ironing board, 47 ¼x14 ½ " package

One box, 60″ × 15½″ × 2¼″, at 12 lb 8 oz: the DÄNKA is light enough to carry one-handed and long enough to be awkward anyway. Weight is not the problem; length is. A 60″ slab will not sit crosswise in a normal trunk, so it rides diagonally or waits for a folded seat. Nearly any hatchback takes it with the bench down, a wagon or SUV swallows it flat, and it can angle across the rear seat of a sedan in a pinch. Feed it nose first through the opening and keep it supported along its length; a carton only 2¼″ thick flexes if you bridge it, and the corners dent before anything else.

Frequently asked questions

Find quick answers about fit for DÄNKA Ironing board, 47 ¼x14 ½ " in Audi Q3 2019, including seats up vs seats down, limiting factor, best orientation, and package-by-package margins.

Will DÄNKA Ironing board, 47 ¼x14 ½ " fit in Audi Q3 2019?

Yes. With seats down, it fits with +9⅜″ at Cargo width. Best orientation: diagonal.

What is the tightest part?

The limiting factor is Cargo width, with +9⅜″ margin in seats down.

Can I load it diagonally?

Yes, diagonal is the best orientation for this check, with +9⅜″ around the limiting point.

How tight is this fit?

This result is in the comfortable clearance band (+9⅜″ at Cargo width).

Does it fit with seats up or seats down?

Seats up: No (-3¼″). Seats down: Yes (+9⅜″). Default selection follows YES > MAYBE > NO.

Do I need to fold the seats?

Results differ by configuration. Seats up is No and seats down is Yes.

Which loading orientation works best?

Diagonal is the best orientation for this result in seats down.

How confident is this result?

Confidence is 95 out of 100 based on available dimensions and margin tightness.