All items that fit an Audi A1 2020

Will fit in an ?

Yes, it will fit!

Good news: DÄNKA Ironing board, 47 ¼x14 ½″ should fit diagonally in an Audi A1 2020 with seats down.

Audi A1 2020

Fit Details

With seats down, Good news - this package should fit, with 2¾″ to spare at cargo length when loading diagonal. We're about 95% confident in this estimate.

DÄNKA Ironing board, 47 ¼x14 ½″

DÄNKA Ironing board, 47 ¼x14 ½″

Box: 60″ × 15½″ × 2¼″ · 12 lb 8 oz

Based on IKEA US (United States).

Package dimensions last checked and updated on Oct 21, 2026

Link to the source

  • Package #1

    60″ × 15½″ × 2¼″

    Status:+2¾″ to spare

    Limiting factor:Cargo length

    Best orientation:Diagonal

Vehicle limits

Trunk limits for Audi A1 2020

Opening width / height above sill

39″ / 24⅜″

Cargo width / height

39″ / 30¾″

Cargo length seats up / down

26⅜″ / 53⅛″

Loading sill height

28¾″

Audi A1 2020

Measurements last checked and updated on Oct 21, 2026

Helpful tips

Use these loading tips to improve your chances of fitting DÄNKA Ironing board, 47 ¼x14 ½″ in Audi A1 2020.

  • Use available cargo length

    Push the package fully toward the seat backs to use all cargo length.

  • Load diagonally first

    Load diagonally first, then straighten once inside.

  • Clear real-world obstacles

    Clear the trunk before loading. Existing cargo, trunk cover, and wheel-arch bumps can reduce usable space.

Other items to check in Audi A1 2020

Ranked by fit margin and package-dimension similarity. This improves as we index more items.

About the Audi A1 2020 boot

Width is the easy part of the A1's boot. The opening is 39″ across, and the floor never gets narrower than that. Length is tighter. Seats up, the floor is just 26⅜″ long, and folding them gives you another 26¾″, for 53⅛″, which takes shorter flat packs but not the longest. Height is limited too, with 24⅜″ of clear height above a loading sill 28¾″ off the ground and the floor 6¼″ lower still. With the seats up the floor is wider than it is long, so a box too long to go in front to back may still fit across it, or at an angle on its side.

About the DÄNKA Ironing board, 47 ¼x14 ½″ package

Boxed, the DÄNKA ironing board measures 60″ × 15½″ × 2¼″ and weighs 12 lb 8 oz. The weight is no trouble. The shape takes more thought, because the box is long and thin. Lying straight, it fills 60″ of boot floor from end to end. Held by one end, a box like this wobbles, and the far end is the part that knocks into things. Hold it at its middle instead, where it balances, and you can carry it to the car on your own.

Frequently asked questions

Find quick answers about fit for DÄNKA Ironing board, 47 ¼x14 ½″ in Audi A1 2020, including seats up vs seats down, limiting factor, best orientation, and package-by-package margins.

Will DÄNKA Ironing board, 47 ¼x14 ½″ fit in Audi A1 2020?

Yes. With seats down, it fits with 2¾″ to spare at Cargo length. Best orientation: diagonal.

What is the tightest part?

The limiting factor is Cargo length, with +2¾″ margin in seats down.

Do I need to fold the seats?

Results differ by configuration. Seats up is No and seats down is Yes.

What could change the result in real life?

Cargo liners, wheel-arch bumps, the trunk cover, and items already in the trunk can reduce usable space. Measure the tightest point if the fit is close.

How tight is this fit?

This result is in the tight positive clearance band (+2¾″ at Cargo length).

Does it fit with seats up or seats down?

Seats up: No (-10⅞″). Seats down: Yes (+2¾″). Default selection follows YES > MAYBE > NO.

What do YES, MAYBE and NO mean here?

YES means there is at least 2⅜″ to spare at the tightest point, in the best way the box can go in. MAYBE means it fits on paper, but with less than 2⅜″ to spare, so trim, the parcel shelf or the loading angle can decide it. NO means the box is bigger than the space at its tightest point, whichever way it goes in. Every margin on this page is that real gap: the car's measurement minus the box's.

Can I load it diagonally?

Yes, diagonal is the best orientation for this check, with +2¾″ around the limiting point.

Which loading orientation works best?

Diagonal is the best orientation for this result in seats down.

How confident is this result?

Confidence is 95 out of 100 based on available dimensions and margin tightness.