
POÄNG Armchair, birch veneer/Knisa light beige
+3¼″ margin
All items that fit an Alfa Romeo Brera 2008
No, it won't fit.

Fit Details

DÄNKA Ironing board, 47 ¼x14 ½″
Box: 60″ × 15½″ × 2¼″ · 12 lb 8 oz
Based on IKEA US (United States).
Package dimensions last checked and updated on Oct 21, 2026
Package
Status
Limiting factor
Best orientation
Package #1
60″ × 15½″ × 2¼″
Status:8¾″ short
Limited by
Limiting factor:Cargo length
Best orientation:Diagonal
Vehicle limits

Opening width / height above sill
39″ / 13″
Cargo width / height
33⅛″ / 24″
Cargo length seats up / down
37⅜″ / 59⅞″
Loading sill height
35⅜″
Alfa Romeo Brera 2008
Measurements last checked and updated on Oct 21, 2026
Helpful tips
Use these loading tips to improve your chances of fitting DÄNKA Ironing board, 47 ¼x14 ½″ in Alfa Romeo Brera 2008.
Use available cargo length
Use seats down if available to gain cargo length.
Load diagonally first
Load diagonally first, then straighten once inside.
Try fitting alternatives
Check the Similar items that fit section for safer alternatives.
Alternatives that fit in Alfa Romeo Brera 2008
Ranked by fit margin and package-dimension similarity. This improves as we index more items.
About the Alfa Romeo Brera 2008 boot
The Brera's way in is low. Above the loading sill there is a gap of only 13″, and every box has to pass through it. The tailgate opening is 39″ wide and the floor narrows to 33⅛″. Inside, the floor-to-top height is 24″, but that floor sits 11″ below a high sill at 35⅜″. With the rear seats up, the floor runs 37⅜″, which suits a short flat pack or two. Fold them and the floor reaches 59⅞″, room for longer packs. Find each box's thinnest side before you buy: it has to be 13″ or less to get through.
About the DÄNKA Ironing board, 47 ¼x14 ½″ package
Boxed, the DÄNKA ironing board measures 60″ × 15½″ × 2¼″ and weighs 12 lb 8 oz. The weight is no trouble. The shape takes more thought, because the box is long and thin. Lying straight, it fills 60″ of boot floor from end to end. Held by one end, a box like this wobbles, and the far end is the part that knocks into things. Hold it at its middle instead, where it balances, and you can carry it to the car on your own.
Frequently asked questions
Find quick answers about fit for DÄNKA Ironing board, 47 ¼x14 ½″ in Alfa Romeo Brera 2008, including seats up vs seats down, limiting factor, best orientation, and package-by-package margins.
Will DÄNKA Ironing board, 47 ¼x14 ½″ fit in Alfa Romeo Brera 2008?
No. With seats up, it is short by 8¾″ at Cargo length, even with diagonal loading.
What is the tightest part?
The limiting factor is Cargo length, with -8¾″ margin in seats up.
Why does it not fit?
The blocker is Cargo length: with seats up, the box is 8¾″ bigger than the space there.
Can I load it diagonally?
Yes, diagonal is the best orientation for this check, with -8¾″ around the limiting point.
How tight is this fit?
This result is in the clear no-fit band (-8¾″ at Cargo length).
Does it fit with seats up or seats down?
Seats up: No (-8¾″). Seats down: No (-⅛″). Default selection follows YES > MAYBE > NO.
What do YES, MAYBE and NO mean here?
YES means there is at least 2⅜″ to spare at the tightest point, in the best way the box can go in. MAYBE means it fits on paper, but with less than 2⅜″ to spare, so trim, the parcel shelf or the loading angle can decide it. NO means the box is bigger than the space at its tightest point, whichever way it goes in. Every margin on this page is that real gap: the car's measurement minus the box's.
What should I do instead?
Use the Helpful tips & alternatives section to choose a smaller item, different orientation, or split-load plan.
Which loading orientation works best?
Diagonal is the best orientation for this result in seats up.
How confident is this result?
Confidence is 95 out of 100 based on available dimensions and margin tightness.