LAGKAPTEN / ADILS Desk, white, 55 1/8x23 5/8 "
+15½″ margin
Will fit in an ?
Yes, it will fit!
Good news: DÄNKA Ironing board, 47 ¼x14 ½ " should fit diagonally in an Alfa Romeo 159 2010 with seats down.
Fit Details
With seats down, Good news - this package should fit. You have about +11¾″ of clearance at cargo length when loading diagonal. We're about 95% confident in this estimate.
DÄNKA Ironing board, 47 ¼x14 ½ "
Box: 60″ × 15½″ × 2¼″ · 12 lb 8 oz
Based on IKEA US (United States).
Package dimensions last checked and updated on Aug 24, 2026
Package
Status
Limiting factor
Best orientation
Package #1
60″ × 15½″ × 2¼″
Status:+11¾″ margin
Limited by
Limiting factor:Cargo length
Best orientation:Diagonal
Vehicle limits
Opening width / height
36⅝″ / 50¾″
Cargo width / height
36⅝″ / 60⅝″
Cargo length seats up / down
40⅛″ / 69⅝″
Loading sill height
30⅜″
Alfa Romeo 159 2010
Measurements last checked and updated on Sep 01, 2026
Helpful tips
Use these loading tips to improve your chances of fitting DÄNKA Ironing board, 47 ¼x14 ½ " in Alfa Romeo 159 2010.
Use available cargo length
Push the package fully toward the seat backs to use all cargo length.
Load diagonally first
Load diagonally first, then straighten once inside.
Other items to check in Alfa Romeo 159 2010
Ranked by fit margin and package-dimension similarity. This improves as we index more items.
About the Alfa Romeo 159 2010 boot
The 159 gives you plenty of height at the opening and less width than you would like. The mouth measures 36⅝″ wide by 50¾″ tall, so tall boxes go in easily, and the floor matches it at 36⅝″ across its narrowest point. Length runs 40⅛″ with the seats up and 69⅝″ folded, a gain of 29½″. Wide, rigid cartons are the ones that fight you here. The sill is 30⅜″ off the ground with a 9⅞″ drop to the floor, so lift over the lip and lower, rather than sliding.
About the DÄNKA Ironing board, 47 ¼x14 ½ " package
One box, 60″ × 15½″ × 2¼″, at 12 lb 8 oz: the DÄNKA is light enough to carry one-handed and long enough to be awkward anyway. Weight is not the problem; length is. A 60″ slab will not sit crosswise in a normal trunk, so it rides diagonally or waits for a folded seat. Nearly any hatchback takes it with the bench down, a wagon or SUV swallows it flat, and it can angle across the rear seat of a sedan in a pinch. Feed it nose first through the opening and keep it supported along its length; a carton only 2¼″ thick flexes if you bridge it, and the corners dent before anything else.
Frequently asked questions
Find quick answers about fit for DÄNKA Ironing board, 47 ¼x14 ½ " in Alfa Romeo 159 2010, including seats up vs seats down, limiting factor, best orientation, and package-by-package margins.
Will DÄNKA Ironing board, 47 ¼x14 ½ " fit in Alfa Romeo 159 2010?
Yes. With seats down, it fits with +11¾″ at Cargo length. Best orientation: diagonal.
What is the tightest part?
The limiting factor is Cargo length, with +11¾″ margin in seats down.
Can I load it diagonally?
Yes, diagonal is the best orientation for this check, with +11¾″ around the limiting point.
How tight is this fit?
This result is in the comfortable clearance band (+11¾″ at Cargo length).
Does it fit with seats up or seats down?
Seats up: No (-6¾″). Seats down: Yes (+11¾″). Default selection follows YES > MAYBE > NO.
Do I need to fold the seats?
Results differ by configuration. Seats up is No and seats down is Yes.
Which loading orientation works best?
Diagonal is the best orientation for this result in seats down.
How confident is this result?
Confidence is 95 out of 100 based on available dimensions and margin tightness.