Will fit in an ?

No, it won't fit.

It will not fit in this setup: BISSA Shoe cabinet with 3 compartments, white, 19 1/4x11x53 1/8 " is too large for an Alfa Romeo Mito 2010 with seats up.

Alfa Romeo Mito 2010

Fit Details

With seats up, This package will not fit in this setup. The blocker is opening width, and you're short by 15⅝″ even with diagonal loading. We're about 95% confident in this estimate.

BISSA Shoe cabinet with 3 compartments, white, 19 1/4x11x53 1/8 "

BISSA Shoe cabinet with 3 compartments, white, 19 1/4x11x53 1/8 "

Box: 54¼″ × 16¾″ × 3″ · 45 lb 15 oz

Based on IKEA US (United States).

Package dimensions last checked and updated on Jul 20, 2026

Also on IKEA:United Kingdom
Link to the source

  • Package #1

    54¼″ × 16¾″ × 3″

    Status:15⅝″ short

    Limiting factor:Opening width

    Best orientation:Diagonal

Vehicle limits

Trunk limits for Alfa Romeo Mito 2010

Opening width / height

31½″ / 32⅝″

Cargo width / height

38⅝″ / 45⅝″

Cargo length seats up / down

26¾″ / 50⅜″

Loading sill height

31⅞″

Alfa Romeo Mito 2010

Measurements last checked and updated on Sep 09, 2026

Helpful tips

Use these loading tips to improve your chances of fitting BISSA Shoe cabinet with 3 compartments, white, 19 1/4x11x53 1/8 " in Alfa Romeo Mito 2010.

  • Optimize opening width

    Keep the narrow edge leading while entering the opening.

  • Load diagonally first

    Load diagonally first, then straighten once inside.

  • Try fitting alternatives

    Check the Similar items that fit section for safer alternatives.

Alternatives that fit in Alfa Romeo Mito 2010

Ranked by fit margin and package-dimension similarity. This improves as we index more items.

About the BISSA Shoe cabinet with 3 compartments, white, 19 1/4x11x53 1/8 " package

BISSA ships as a single flat box, 54¼″ × 16¾″ × 3″, and it weighs 45 lb 15 oz. At 3″ thick it slides into gaps a built cabinet never would, so the thickness is not your problem. The length is. At 54¼″ you need a trunk that measures long enough on the floor, or one rear seat folded so the box can run forward between the seats. Most hatchbacks take it with the seats down, and any wagon or SUV swallows it flat. Lift it on edge with two hands, and rest it on a long edge rather than a corner, because 45 lb 15 oz of flat pack lands hard and the corners split first.

Frequently asked questions

Find quick answers about fit for BISSA Shoe cabinet with 3 compartments, white, 19 1/4x11x53 1/8 " in Alfa Romeo Mito 2010, including seats up vs seats down, limiting factor, best orientation, and package-by-package margins.

Will BISSA Shoe cabinet with 3 compartments, white, 19 1/4x11x53 1/8 " fit in Alfa Romeo Mito 2010?

No. With seats up, it is short by 15⅝″ at Opening width, even with diagonal loading.

What is the tightest part?

The limiting factor is Opening width, with -15⅝″ margin in seats up.

What should I do instead?

Use the Helpful tips & alternatives section to choose a smaller item, different orientation, or split-load plan.

Is the trunk opening the issue?

Yes. The tightest constraint is at the opening (Opening width) with -15⅝″ margin.

How tight is this fit?

This result is in the clear no-fit band (-15⅝″ at Opening width).

Does it fit with seats up or seats down?

Seats up: No (-15⅝″). Seats down: No (-3⅝″). Default selection follows YES > MAYBE > NO.

Why does it not fit?

The blocker is Opening width. The worst margin is -15⅝″ in seats up, so clearance is below the required buffer.

Can I load it diagonally?

Yes, diagonal is the best orientation for this check, with -15⅝″ around the limiting point.

Which loading orientation works best?

Diagonal is the best orientation for this result in seats up.

How confident is this result?

Confidence is 95 out of 100 based on available dimensions and margin tightness.