
FJÄLLBO Shelf unit, black, 20 1/8x53 1/2″
+6⅞″ margin
All items that fit an Alfa Romeo Giulietta Turismo 2010
Yes, it will fit!

Fit Details

BISSA Shoe cabinet with 3 compartments, white, 19 1/4x11x53 1/8″
Box: 54¼″ × 16¾″ × 3″ · 45 lb 15 oz
Based on IKEA US (United States).
Package dimensions last checked and updated on Oct 21, 2026
Package
Status
Limiting factor
Best orientation
Package #1
54¼″ × 16¾″ × 3″
Status:+4⅞″ to spare
Limited by
Limiting factor:Opening height
Best orientation:Diagonal
Vehicle limits

Opening width / height above sill
31⅞″ / 21⅝″
Cargo width / height
40⅛″ / 29⅞″
Cargo length seats up / down
30⅜″ / 57⅞″
Loading sill height
30¾″
Alfa Romeo Giulietta Turismo 2010
Measurements last checked and updated on Oct 21, 2026
Helpful tips
Use these loading tips to improve your chances of fitting BISSA Shoe cabinet with 3 compartments, white, 19 1/4x11x53 1/8″ in Alfa Romeo Giulietta Turismo 2010.
Manage opening height
Keep the highest edge low at the trunk opening.
Load diagonally first
Load diagonally first, then straighten once inside.
Other items to check in Alfa Romeo Giulietta Turismo 2010
Ranked by fit margin and package-dimension similarity. This improves as we index more items.
About the Alfa Romeo Giulietta Turismo 2010 boot
Getting boxes into the Giulietta Turismo's boot takes a lift. The loading sill sits at 30¾″, and the floor is 8¼″ lower again. The opening is the narrow part: 31⅞″ wide with 21⅝″ of clear height above the sill, while the floor inside never narrows below 40⅛″. Leave the rear seats up and the floor runs 30⅜″, fine for a small stack of boxes. The seats fold to add 27½″, for 57⅞″ in all, so long flat packs become an option. Ask a second person to help with any heavy box, so the two of you lift it over that sill together.
About the BISSA Shoe cabinet with 3 compartments, white, 19 1/4x11x53 1/8″ package
Only 3″ thick, yet the BISSA box weighs 45 lb 15 oz: a dense panel of 54¼″ × 16¾″ × 3″. A box this thin and heavy tires your hands fast, because its edges give you little to grip. Lying flat and straight, it needs 54¼″ by 16¾″ of boot floor. Standing on its side at an angle, it needs less floor, and the verdict on this page checks that way too. Before you lift, slide your hands right under the bottom edge instead of squeezing the sides, so the weight sits on your palms, not your fingertips.
Frequently asked questions
Find quick answers about fit for BISSA Shoe cabinet with 3 compartments, white, 19 1/4x11x53 1/8″ in Alfa Romeo Giulietta Turismo 2010, including seats up vs seats down, limiting factor, best orientation, and package-by-package margins.
Will BISSA Shoe cabinet with 3 compartments, white, 19 1/4x11x53 1/8″ fit in Alfa Romeo Giulietta Turismo 2010?
Yes. With seats down, it fits with 4⅞″ to spare at Opening height. Best orientation: diagonal.
What is the tightest part?
The limiting factor is Opening height, with +4⅞″ margin in seats down.
Do I need to fold the seats?
Results differ by configuration. Seats up is No and seats down is Yes.
Is the trunk opening the issue?
Yes. The tightest constraint is at the opening (Opening height) with +4⅞″ margin.
How tight is this fit?
This result is in the good clearance band (+4⅞″ at Opening height).
Does it fit with seats up or seats down?
Seats up: No (-9⅜″). Seats down: Yes (+4⅞″). Default selection follows YES > MAYBE > NO.
What do YES, MAYBE and NO mean here?
YES means there is at least 2⅜″ to spare at the tightest point, in the best way the box can go in. MAYBE means it fits on paper, but with less than 2⅜″ to spare, so trim, the parcel shelf or the loading angle can decide it. NO means the box is bigger than the space at its tightest point, whichever way it goes in. Every margin on this page is that real gap: the car's measurement minus the box's.
Can I load it diagonally?
Yes, diagonal is the best orientation for this check, with +4⅞″ around the limiting point.
Which loading orientation works best?
Diagonal is the best orientation for this result in seats down.
How confident is this result?
Confidence is 95 out of 100 based on available dimensions and margin tightness.