BESTÅ TV unit, white, 47 1/4x15 3/4x25 1/4″
+8⅜″ margin
All items that fit an Alfa Romeo Brera 2008
Will fit in an ?
Yes, it will fit!
Good news: BISSA Shoe cabinet with 3 compartments, white, 19 1/4x11x53 1/8″ should fit in a straight orientation in an Alfa Romeo Brera 2008 with seats down.
Fit Details
With seats down, Good news - this package should fit, with 5⅝″ to spare at cargo length when loading straight. We're about 95% confident in this estimate.
BISSA Shoe cabinet with 3 compartments, white, 19 1/4x11x53 1/8″
Box: 54¼″ × 16¾″ × 3″ · 45 lb 15 oz
Based on IKEA US (United States).
Package dimensions last checked and updated on Oct 21, 2026
Package
Status
Limiting factor
Best orientation
Package #1
54¼″ × 16¾″ × 3″
Status:+5⅝″ to spare
Limited by
Limiting factor:Cargo length
Best orientation:Straight
Vehicle limits
Opening width / height above sill
39″ / 13″
Cargo width / height
33⅛″ / 24″
Cargo length seats up / down
37⅜″ / 59⅞″
Loading sill height
35⅜″
Alfa Romeo Brera 2008
Measurements last checked and updated on Oct 21, 2026
Helpful tips
Use these loading tips to improve your chances of fitting BISSA Shoe cabinet with 3 compartments, white, 19 1/4x11x53 1/8″ in Alfa Romeo Brera 2008.
Use available cargo length
Push the package fully toward the seat backs to use all cargo length.
Keep a straight loading path
Keep the package straight and level while loading.
Other items to check in Alfa Romeo Brera 2008
Ranked by fit margin and package-dimension similarity. This improves as we index more items.
About the Alfa Romeo Brera 2008 boot
The Brera's way in is low. Above the loading sill there is a gap of only 13″, and every box has to pass through it. The tailgate opening is 39″ wide and the floor narrows to 33⅛″. Inside, the floor-to-top height is 24″, but that floor sits 11″ below a high sill at 35⅜″. With the rear seats up, the floor runs 37⅜″, which suits a short flat pack or two. Fold them and the floor reaches 59⅞″, room for longer packs. Find each box's thinnest side before you buy: it has to be 13″ or less to get through.
About the BISSA Shoe cabinet with 3 compartments, white, 19 1/4x11x53 1/8″ package
Only 3″ thick, yet the BISSA box weighs 45 lb 15 oz: a dense panel of 54¼″ × 16¾″ × 3″. A box this thin and heavy tires your hands fast, because its edges give you little to grip. Lying flat and straight, it needs 54¼″ by 16¾″ of boot floor. Standing on its side at an angle, it needs less floor, and the verdict on this page checks that way too. Before you lift, slide your hands right under the bottom edge instead of squeezing the sides, so the weight sits on your palms, not your fingertips.
Frequently asked questions
Find quick answers about fit for BISSA Shoe cabinet with 3 compartments, white, 19 1/4x11x53 1/8″ in Alfa Romeo Brera 2008, including seats up vs seats down, limiting factor, best orientation, and package-by-package margins.
Will BISSA Shoe cabinet with 3 compartments, white, 19 1/4x11x53 1/8″ fit in Alfa Romeo Brera 2008?
Yes. With seats down, it fits with 5⅝″ to spare at Cargo length. Best orientation: straight.
What is the tightest part?
The limiting factor is Cargo length, with +5⅝″ margin in seats down.
Do I need to fold the seats?
Results differ by configuration. Seats up is No and seats down is Yes.
How tight is this fit?
This result is in the good clearance band (+5⅝″ at Cargo length).
Does it fit with seats up or seats down?
Seats up: No (-5⅛″). Seats down: Yes (+5⅝″). Default selection follows YES > MAYBE > NO.
What do YES, MAYBE and NO mean here?
YES means there is at least 2⅜″ to spare at the tightest point, in the best way the box can go in. MAYBE means it fits on paper, but with less than 2⅜″ to spare, so trim, the parcel shelf or the loading angle can decide it. NO means the box is bigger than the space at its tightest point, whichever way it goes in. Every margin on this page is that real gap: the car's measurement minus the box's.
Which loading orientation works best?
Straight is the best orientation for this result in seats down.
How confident is this result?
Confidence is 95 out of 100 based on available dimensions and margin tightness.